PETG-CF Settings for Creality Ender 3 V2 Neo
Recommended slicer settings for printing PETG-CF on the Creality Ender 3 V2 Neo (220 x 220 x 250 mm build volume, 120 mm/s max speed, Bowden extruder).
Slicer-Konfiguration
Kopiere diese Werte in deinen Slicer (Cura, OrcaSlicer, PrusaSlicer, Bambu Studio)| Einstellung | Wert | Bereich |
|---|---|---|
| Düsentemperatur | 245°C | 230-260°C |
| Heizbetttemperatur | 75°C | 70-80°C |
| Erste Schicht Düse | 250°C | +5°C above normal |
| Erste Schicht Heizbett | 80°C | +5°C above normal |
| Druckgeschwindigkeit | 40 mm/s | 30-50 mm/s |
| Erste Schicht Geschwindigkeit | 15 mm/s | 25-50% of normal |
| Wandgeschwindigkeit | 30 mm/s | 70-80% of normal |
| Verfahrgeschwindigkeit | 75 mm/s | 120-150% of print speed |
| Schichthöhe | 0.2mm | 0.12-0.28mm |
| Infill | 15-20% | 10-30% |
| Wandanzahl | 2-3 | Perimeters/shells |
| Oben/Unten Schichten | 3-4 | Solid layers |
| Kühlventilator | 30-50% | From layer 2+ |
| Rückzugsdistanz | 4-6 mm | Bowden |
| Rückzugsgeschwindigkeit | 40 mm/s | Bowden |
Vor dem Drucken
Druckqualität Profile
Three presets for common use cases with PETG-CF on the Creality Ender 3 V2 Neo.
| Profile | Layer Height | Speed | Infill | Best For |
|---|---|---|---|---|
| Draft | 0.28mm | 50 mm/s | 10-15% | Rapid prototyping, test fits |
| Standard | 0.20mm | 40 mm/s | 15-20% | General purpose, everyday prints |
| Quality | 0.12mm | 30 mm/s | 20-30% | Miniatures, display pieces, fine detail |
Haftung des Heizbetts
PETG Carbon Fiber haftet ähnlich wie normales PETG, manchmal besser durch Faserrauhheit. Verwende PEI-Bleche oder strukturierte Oberflächen.
Temperatur-Abstimmungsanleitung
Nozzle: 245°C
Range: 230-260°C. Printer max: 260°C.
- Poor layer adhesion? Increase +5°C
- Stringing or oozing? Decrease -5°C
- Print a temperature tower to find your exact sweet spot
Bed: 75°C
Range: 70-80°C. Printer max: 100°C.
- First layer lifting? Increase +5°C
- Elephant's foot? Decrease -5°C
- Let the bed fully preheat before starting
Fehlerbehebung PETG-CF auf Creality Ender 3 V2 Neo
Pro-Tipps für PETG-CF
Eine gehärtete Stahl-Düse ist notwendig
Drucke bei ähnlichen Temperaturen wie normales PETG plus 5°C
Erhöhe Durchsatzrate um 10% wegen Partikeldichte
PETG Carbon Fiber ist steifer und leichter als normales PETG
Trockne vor dem Druck - PETG ist hygroskopisch
Support-Einstellungen
For prints requiring supports with PETG-CF, use tree supports for easier removal and less scarring. Set a 0.15-0.2mm Z-distance between support and model. If you have a dual-extruder setup, consider PVA (for PLA/PETG) or HIPS (for ABS) as dedicated water/solvent-soluble support material.
Creality Ender 3 V2 Neo Specs
| Build Volume | 220 x 220 x 250 mm |
| Max Speed | 120 mm/s |
| Max Nozzle Temp | 260°C |
| Max Bed Temp | 100°C |
| Extruder | Bowden |
PETG-CF Properties
| Nozzle Range | 230-260°C |
| Bed Range | 70-80°C |
| Speed Range | 30-50 mm/s |
| Difficulty | intermediate |
| Drying | 65°C / 8h |
| Enclosure | Not needed |
PETG-CF auf einen Blick
Stärken
- Significantly stiffer than standard PETG
- Professional matte surface finish
- Reduced warping compared to plain PETG
- Good chemical and moisture resistance
- Excellent for functional brackets, jigs, and fixtures
Schwächen
- Requires hardened steel nozzle (carbon fibers destroy brass)
- More brittle than standard PETG (reduced flexibility)
- Must use 0.5mm+ nozzle to prevent clogging
- Slower print speeds required than standard PETG
- Higher cost than plain PETG ($30-45/kg)
Möchtest du personalisierte KI-Einstellungen?
Beschreibe dein genaues Setup und was du druckst. 3DSearch's KI-Experte erzeugt in Sekunden individuelle Slicer-Einstellungen für deinen Creality Ender 3 V2 Neo mit PETG-CF.
3DSearch ausprobieren →Quellen: Based on Creality support documentation, community testing data, manufacturer recommended ranges. Werte berechnet aus Filament-Spezifikationen und Drucker-Hardware-Limits.