PC Settings for Creality Ender 3 V2 Neo
Recommended slicer settings for printing PC on the Creality Ender 3 V2 Neo (220 x 220 x 250 mm build volume, 120 mm/s max speed, Bowden extruder).
Slicer-Konfiguration
Kopiere diese Werte in deinen Slicer (Cura, OrcaSlicer, PrusaSlicer, Bambu Studio)| Einstellung | Wert | Bereich |
|---|---|---|
| Düsentemperatur | 260°C | 260-310°C |
| Heizbetttemperatur | 100°C | 100-120°C |
| Erste Schicht Düse | 260°C | At printer max |
| Erste Schicht Heizbett | 100°C | At printer max |
| Druckgeschwindigkeit | 30 mm/s | 20-40 mm/s |
| Erste Schicht Geschwindigkeit | 15 mm/s | 25-50% of normal |
| Wandgeschwindigkeit | 23 mm/s | 70-80% of normal |
| Verfahrgeschwindigkeit | 60 mm/s | 120-150% of print speed |
| Schichthöhe | 0.2mm | 0.12-0.28mm |
| Infill | 15-20% | 10-30% |
| Wandanzahl | 2-3 | Perimeters/shells |
| Oben/Unten Schichten | 3-4 | Solid layers |
| Kühlventilator | 0-10% | From layer 2+ |
| Rückzugsdistanz | 4-6 mm | Bowden |
| Rückzugsgeschwindigkeit | 40 mm/s | Bowden |
Vor dem Drucken
Druckqualität Profile
Three presets for common use cases with PC on the Creality Ender 3 V2 Neo.
| Profile | Layer Height | Speed | Infill | Best For |
|---|---|---|---|---|
| Draft | 0.28mm | 40 mm/s | 10-15% | Rapid prototyping, test fits |
| Standard | 0.20mm | 30 mm/s | 15-20% | General purpose, everyday prints |
| Quality | 0.12mm | 20 mm/s | 20-30% | Miniatures, display pieces, fine detail |
Haftung des Heizbetts
PC (Polycarbonat) haftet gut auf PEI-Blechen und Glasbetten mit ABS-Emulsion. Die Haftung ist zuverlässig. Ein Brim wird empfohlen für große Teile.
Temperatur-Abstimmungsanleitung
Nozzle: 260°C
Range: 260-310°C. Printer max: 260°C.
- Poor layer adhesion? Increase +5°C
- Stringing or oozing? Decrease -5°C
- Print a temperature tower to find your exact sweet spot
Bed: 100°C
Range: 100-120°C. Printer max: 100°C.
- First layer lifting? Increase +5°C
- Elephant's foot? Decrease -5°C
- Let the bed fully preheat before starting
Fehlerbehebung PC auf Creality Ender 3 V2 Neo
Pro-Tipps für PC
PC benötigt hohe Temperaturen (280-310°C) und ist daher für viele Drucker nicht geeignet
Ein beheiztes Gehäuse ist dringend empfohlen
Sehr langsam drucken - höchstens 30-40 mm/s
PC ist extrem zäh und transparent - ideal für funktionelle Teile
Das Material ist teuer - plane sorgfältig
Support-Einstellungen
For prints requiring supports with PC, use tree supports for easier removal and less scarring. Set a 0.15-0.2mm Z-distance between support and model. If you have a dual-extruder setup, consider PVA (for PLA/PETG) or HIPS (for ABS) as dedicated water/solvent-soluble support material.
Creality Ender 3 V2 Neo Specs
| Build Volume | 220 x 220 x 250 mm |
| Max Speed | 120 mm/s |
| Max Nozzle Temp | 260°C |
| Max Bed Temp | 100°C |
| Extruder | Bowden |
PC Properties
| Nozzle Range | 260-310°C |
| Bed Range | 100-120°C |
| Speed Range | 20-40 mm/s |
| Difficulty | advanced |
| Drying | 80°C / 10h |
| Enclosure | Recommended |
PC auf einen Blick
Stärken
- Arguably the toughest non-flexible filament
- Excellent heat resistance (softens ~150C)
- Can withstand repeated impacts without shattering
- Can print in translucent/clear
- Ideal for protective equipment and high-temp parts
Schwächen
- Requires all-metal hotend
- Severe warping without heated enclosure
- Very high printing temperatures
- High moisture sensitivity
- Most demanding common filament to print
Möchtest du personalisierte KI-Einstellungen?
Beschreibe dein genaues Setup und was du druckst. 3DSearch's KI-Experte erzeugt in Sekunden individuelle Slicer-Einstellungen für deinen Creality Ender 3 V2 Neo mit PC.
3DSearch ausprobieren →Quellen: Based on Creality support documentation, community testing data, manufacturer recommended ranges. Werte berechnet aus Filament-Spezifikationen und Drucker-Hardware-Limits.