PAHT-CF Settings for Bambu Lab H2D Pro
Recommended slicer settings for printing PAHT-CF on the Bambu Lab H2D Pro (350 x 320 x 325 mm build volume, 1000 mm/s max speed, direct drive extruder).
إعدادات Slicer
انسخ هذه القيم إلى Slicer الخاص بك (Cura, OrcaSlicer, PrusaSlicer, Bambu Studio)| الإعداد | القيمة | النطاق |
|---|---|---|
| درجة حرارة الفوهة | 295°C | 280-310°C |
| درجة حرارة المنصة | 110°C | 100-120°C |
| الفوهة للطبقة الأولى | 300°C | +5°C above normal |
| المنصة للطبقة الأولى | 115°C | +5°C above normal |
| سرعة الطباعة | 35 mm/s | 25-45 mm/s |
| سرعة الطبقة الأولى | 15 mm/s | 25-50% of normal |
| سرعة الجدران | 26 mm/s | 70-80% of normal |
| سرعة الانتقال | 68 mm/s | 120-150% of print speed |
| ارتفاع الطبقة | 0.2mm | 0.12-0.28mm |
| Infill | 15-20% | 10-30% |
| عدد الجدران | 2-3 | Perimeters/shells |
| الطبقات العلوية/السفلية | 3-4 | Solid layers |
| مروحة التبريد | 100% | From layer 2+ |
| مسافة السحب | 0.8-1.2 mm | Direct drive |
| سرعة السحب | 40 mm/s | Direct drive |
قبل أن تطبع
ملفات تعريف جودة الطباعة
Three presets for common use cases with PAHT-CF on the Bambu Lab H2D Pro.
| Profile | Layer Height | Speed | Infill | Best For |
|---|---|---|---|---|
| Draft | 0.28mm | 45 mm/s | 10-15% | Rapid prototyping, test fits |
| Standard | 0.20mm | 35 mm/s | 15-20% | General purpose, everyday prints |
| Quality | 0.12mm | 25 mm/s | 20-30% | Miniatures, display pieces, fine detail |
التصاق بالمنصة
PAHT-CF (high-temperature nylon-CF) requires Garolite (G10) sheet or high-temp PEI at 100-120°C. A brim is essential. Enclosure is mandatory. Print from a dry box. Magigoo PA adhesive provides the best results.
دليل ضبط درجة الحرارة
Nozzle: 295°C
Range: 280-310°C. Printer max: 350°C.
- Poor layer adhesion? Increase +5°C
- Stringing or oozing? Decrease -5°C
- Print a temperature tower to find your exact sweet spot
Bed: 110°C
Range: 100-120°C. Printer max: 120°C.
- First layer lifting? Increase +5°C
- Elephant's foot? Decrease -5°C
- Let the bed fully preheat before starting
استكشاف أخطاء PAHT-CF على Bambu Lab H2D Pro
نصائح احترافية لـ PAHT-CF
PAHT-CF is one of the most demanding filaments to print -- industrial-grade setup recommended
Requires 280-310°C nozzle, 100-120°C bed, and sealed enclosure
Dry at 90°C for 12+ hours; PAHT-CF is extremely hygroscopic
The reward is exceptional heat resistance (HDT >200°C) and stiffness
إعدادات الدعائم
For prints requiring supports with PAHT-CF, use tree supports for easier removal and less scarring. Set a 0.15-0.2mm Z-distance between support and model. If you have a dual-extruder setup, consider PVA (for PLA/PETG) or HIPS (for ABS) as dedicated water/solvent-soluble support material.
Bambu Lab H2D Pro Specs
| Build Volume | 350 x 320 x 325 mm |
| Max Speed | 1000 mm/s |
| Max Nozzle Temp | 350°C |
| Max Bed Temp | 120°C |
| Extruder | Direct Drive |
PAHT-CF Properties
| Nozzle Range | 280-310°C |
| Bed Range | 100-120°C |
| Speed Range | 25-45 mm/s |
| Difficulty | advanced |
| Drying | 90°C / 12h |
| Enclosure | Recommended |
PAHT-CF في لمحة
نقاط القوة
- Heat resistance up to 180°C
- Exceptional stiffness-to-weight ratio
- Best carbon fiber nylon for high-temp applications
- Good chemical resistance
نقاط الضعف
- Requires high-temp all-metal hotend (300°C+)
- Hardened nozzle mandatory
- Must print from heated dry box
- Very expensive (~$60-100/kg)
تريد إعدادات AI مخصصة؟
صِف إعدادك الدقيق وما تطبعه. يُنشئ خبير AI في 3DSearch إعدادات تقطيع مخصصة لطابعتك Bambu Lab H2D Pro مع PAHT-CF خلال ثوانٍ.
جرّب 3DSearch →المصادر: Based on Bambu Lab Wiki (wiki.bambulab.com), community testing data, manufacturer recommended ranges. تم حساب القيم من مواصفات الفيلامنت وحدود عتاد الطابعة.