Carbon Fiber PLA Settings for Markforged Onyx Pro
Recommended slicer settings for printing Carbon Fiber PLA on the Markforged Onyx Pro (320 x 132 x 154 mm build volume, 200 mm/s max speed, direct drive extruder).
不兼容intermediate
不兼容
The max bed temperature of 0°C is below the recommended 50°C for Carbon Fiber PLA. Adhesion may be poor without additional bed adhesion aids.
| Filament Nozzle Requirement | 200-230°C |
| Printer Max Nozzle | 280°C |
| Filament Bed Requirement | 50-65°C |
| Printer Max Bed | N/A |
该怎么办
- Your printer's bed maxes out at 0°C, but Carbon Fiber PLA needs at least 50°C for reliable adhesion.
- Try a compatible filament for your Markforged Onyx Pro — PLA, PETG, and ABS are good options.
- If you need Carbon Fiber PLA specifically, you'll need a printer with a hotend capable of 200°C+ nozzle.
Carbon Fiber PLA Requirements
Carbon Fiber PLA Properties
| Nozzle Range | 200-230°C |
| Bed Range | 50-65°C |
| Speed Range | 30-50 mm/s |
| Difficulty | intermediate |
| Enclosure | Not needed |
| Drying | Not required |
Markforged Onyx Pro Specs
| Build Volume | 320 x 132 x 154 mm |
| Max Speed | 200 mm/s |
| Max Nozzle Temp | 280°C |
| Max Bed Temp | N/A |
| Extruder | Direct Drive |
Carbon Fiber PLA 速览
优势
- Much stiffer than regular PLA
- Reduced warping compared to PLA
- Professional matte surface finish
- Ideal for drone frames, brackets, fixtures
- Lightweight with structural rigidity
劣势
- Requires hardened steel nozzle (destroys brass)
- More brittle than regular PLA
- 25-50% slower print speeds needed
- Does not add tensile strength (short fibers)
- Use 0.5mm+ nozzle to prevent clogging
想要个性化的 AI 参数？
描述你的具体配置和要打印的内容。3DSearch 的 AI 专家会在几秒内为你的 Markforged Onyx Pro 搭配 Carbon Fiber PLA 生成定制切片参数。
试用 3DSearch →来源： Based on manufacturer specifications and community recommendations, community testing data, manufacturer recommended ranges. 参数根据耗材规格和打印机硬件上限计算得出。