Bronze-fill PLA Settings for Creality Ender 3 Pro
Recommended slicer settings for printing Bronze-fill PLA on the Creality Ender 3 Pro (220 x 220 x 250 mm build volume, 180 mm/s max speed, Bowden extruder).
切片配置
将这些参数复制到你的切片软件（Cura、OrcaSlicer、PrusaSlicer、Bambu Studio）| 参数 | 数值 | 范围 |
|---|---|---|
| 喷嘴温度 | 208°C | 195-220°C |
| 热床温度 | 55°C | 50-60°C |
| 首层喷嘴 | 213°C | +5°C above normal |
| 首层热床 | 60°C | +5°C above normal |
| 打印速度 | 30 mm/s | 20-40 mm/s |
| 首层速度 | 15 mm/s | 25-50% of normal |
| 外壁速度 | 23 mm/s | 70-80% of normal |
| 空走速度 | 60 mm/s | 120-150% of print speed |
| 层高 | 0.2mm | 0.12-0.28mm |
| Infill | 15-20% | 10-30% |
| 壁数 | 2-3 | Perimeters/shells |
| 顶层/底层 | 3-4 | Solid layers |
| 散热风扇 | 100% | From layer 2+ |
| 回抽距离 | 4-6 mm | Bowden |
| 回抽速度 | 40 mm/s | Bowden |
开始打印前
打印质量预设
Three presets for common use cases with Bronze-fill PLA on the Creality Ender 3 Pro.
| Profile | Layer Height | Speed | Infill | Best For |
|---|---|---|---|---|
| Draft | 0.28mm | 40 mm/s | 10-15% | Rapid prototyping, test fits |
| Standard | 0.20mm | 30 mm/s | 15-20% | General purpose, everyday prints |
| Quality | 0.12mm | 20 mm/s | 20-30% | Miniatures, display pieces, fine detail |
热床附着
青铜填充 PLA 与普通 PLA 粘合但更重。干净的 PEI 片效果良好。对于玻璃热床,使用胶棒。金属颗粒不会显著影响粘合。
温度调校指南
Nozzle: 208°C
Range: 195-220°C. Printer max: 260°C.
- Poor layer adhesion? Increase +5°C
- Stringing or oozing? Decrease -5°C
- Print a temperature tower to find your exact sweet spot
Bed: 55°C
Range: 50-60°C. Printer max: 110°C.
- First layer lifting? Increase +5°C
- Elephant's foot? Decrease -5°C
- Let the bed fully preheat before starting
在 Creality Ender 3 Pro 上打印 Bronze-fill PLA 的问题排查
Bronze-fill PLA 使用技巧
使用硬化钢喷嘴(0.5mm+) -- 金属颗粒迅速磨损黄铜
比标准 PLA 高 5-10°C 打印以获得更好的流量
逐步打磨(200-600 粒),然后用钢羊毛抛光以获得真正的青铜外观
青铜填充 PLA 很重;使用较低的填充以节省装饰零件的材料
支撑设置
For prints requiring supports with Bronze-fill PLA, use tree supports for easier removal and less scarring. Set a 0.15-0.2mm Z-distance between support and model. If you have a dual-extruder setup, consider PVA (for PLA/PETG) or HIPS (for ABS) as dedicated water/solvent-soluble support material.
Creality Ender 3 Pro Specs
| Build Volume | 220 x 220 x 250 mm |
| Max Speed | 180 mm/s |
| Max Nozzle Temp | 260°C |
| Max Bed Temp | 110°C |
| Extruder | Bowden |
Bronze-fill PLA Properties
| Nozzle Range | 195-220°C |
| Bed Range | 50-60°C |
| Speed Range | 20-40 mm/s |
| Difficulty | intermediate |
| Drying | Not required |
| Enclosure | Not needed |
Bronze-fill PLA 速览
优势
- Contains real bronze particles
- Can be polished and patinated for antique look
- Significantly heavier than standard PLA
- Excellent for statues and decorative art
劣势
- Hardened nozzle recommended
- Slow print speeds required
- Expensive
- Brittle — not for functional parts
想要个性化的 AI 参数？
描述你的具体配置和要打印的内容。3DSearch 的 AI 专家会在几秒内为你的 Creality Ender 3 Pro 搭配 Bronze-fill PLA 生成定制切片参数。
试用 3DSearch →来源： Based on Creality support documentation, community testing data, manufacturer recommended ranges. 参数根据耗材规格和打印机硬件上限计算得出。