PAHT-CF Settings for Creality CR-10 SE
Recommended slicer settings for printing PAHT-CF on the Creality CR-10 SE (220 x 220 x 265 mm build volume, 600 mm/s max speed, direct drive extruder).
切片配置
将这些参数复制到你的切片软件（Cura、OrcaSlicer、PrusaSlicer、Bambu Studio）| 参数 | 数值 | 范围 |
|---|---|---|
| 喷嘴温度 | 295°C | 280-310°C |
| 热床温度 | 100°C | 100-120°C |
| 首层喷嘴 | 300°C | +5°C above normal |
| 首层热床 | 100°C | At printer max |
| 打印速度 | 35 mm/s | 25-45 mm/s |
| 首层速度 | 15 mm/s | 25-50% of normal |
| 外壁速度 | 26 mm/s | 70-80% of normal |
| 空走速度 | 68 mm/s | 120-150% of print speed |
| 层高 | 0.2mm | 0.12-0.28mm |
| Infill | 15-20% | 10-30% |
| 壁数 | 2-3 | Perimeters/shells |
| 顶层/底层 | 3-4 | Solid layers |
| 散热风扇 | 100% | From layer 2+ |
| 回抽距离 | 0.8-1.2 mm | Direct drive |
| 回抽速度 | 40 mm/s | Direct drive |
开始打印前
打印质量预设
Three presets for common use cases with PAHT-CF on the Creality CR-10 SE.
| Profile | Layer Height | Speed | Infill | Best For |
|---|---|---|---|---|
| Draft | 0.28mm | 45 mm/s | 10-15% | Rapid prototyping, test fits |
| Standard | 0.20mm | 35 mm/s | 15-20% | General purpose, everyday prints |
| Quality | 0.12mm | 25 mm/s | 20-30% | Miniatures, display pieces, fine detail |
热床附着
PAHT-CF(高温尼龙-CF)需要 Garolite (G10) 片或高温 PEI,100-120°C。裙边至关重要。外罩强制。从干燥盒打印。Magigoo PA 粘合剂提供最佳效果。
温度调校指南
Nozzle: 295°C
Range: 280-310°C. Printer max: 300°C.
- Poor layer adhesion? Increase +5°C
- Stringing or oozing? Decrease -5°C
- Print a temperature tower to find your exact sweet spot
Bed: 100°C
Range: 100-120°C. Printer max: 100°C.
- First layer lifting? Increase +5°C
- Elephant's foot? Decrease -5°C
- Let the bed fully preheat before starting
在 Creality CR-10 SE 上打印 PAHT-CF 的问题排查
PAHT-CF 使用技巧
PAHT-CF 是最苛刻的耗材之一 -- 建议工业级设置
需要 280-310°C 喷嘴、100-120°C 热床和密闭外罩
在 90°C 下干燥 12+ 小时;PAHT-CF 是极度吸水性
奖励是异常的热阻力(HDT >200°C)和刚性
支撑设置
For prints requiring supports with PAHT-CF, use tree supports for easier removal and less scarring. Set a 0.15-0.2mm Z-distance between support and model. If you have a dual-extruder setup, consider PVA (for PLA/PETG) or HIPS (for ABS) as dedicated water/solvent-soluble support material.
Creality CR-10 SE Specs
| Build Volume | 220 x 220 x 265 mm |
| Max Speed | 600 mm/s |
| Max Nozzle Temp | 300°C |
| Max Bed Temp | 100°C |
| Extruder | Direct Drive |
PAHT-CF Properties
| Nozzle Range | 280-310°C |
| Bed Range | 100-120°C |
| Speed Range | 25-45 mm/s |
| Difficulty | advanced |
| Drying | 90°C / 12h |
| Enclosure | Recommended |
PAHT-CF 速览
优势
- Heat resistance up to 180°C
- Exceptional stiffness-to-weight ratio
- Best carbon fiber nylon for high-temp applications
- Good chemical resistance
劣势
- Requires high-temp all-metal hotend (300°C+)
- Hardened nozzle mandatory
- Must print from heated dry box
- Very expensive (~$60-100/kg)
想要个性化的 AI 参数？
描述你的具体配置和要打印的内容。3DSearch 的 AI 专家会在几秒内为你的 Creality CR-10 SE 搭配 PAHT-CF 生成定制切片参数。
试用 3DSearch →来源： Based on Creality support documentation, community testing data, manufacturer recommended ranges. 参数根据耗材规格和打印机硬件上限计算得出。