TPU 87A Settings for Markforged FX10
Recommended slicer settings for printing TPU 87A on the Markforged FX10 (400 x 330 x 315 mm build volume, 250 mm/s max speed, direct drive extruder).
Uyumlu Değiladvanced
Uyumlu Değil
The max bed temperature of 0°C is below the recommended 40°C for TPU 87A. Adhesion may be poor without additional bed adhesion aids.
| Filament Nozzle Requirement | 210-235°C |
| Printer Max Nozzle | 300°C |
| Filament Bed Requirement | 40-60°C |
| Printer Max Bed | N/A |
Bunun yerine yapılması gerekenler
- Your printer's bed maxes out at 0°C, but TPU 87A needs at least 40°C for reliable adhesion.
- Try a compatible filament for your Markforged FX10 — PLA, PETG, and ABS are good options.
- If you need TPU 87A specifically, you'll need a printer with a hotend capable of 210°C+ nozzle.
TPU 87A Requirements
TPU 87A Properties
| Nozzle Range | 210-235°C |
| Bed Range | 40-60°C |
| Speed Range | 10-25 mm/s |
| Difficulty | advanced |
| Enclosure | Not needed |
| Drying | 50°C / 5h |
Markforged FX10 Specs
| Build Volume | 400 x 330 x 315 mm |
| Max Speed | 250 mm/s |
| Max Nozzle Temp | 300°C |
| Max Bed Temp | N/A |
| Extruder | Direct Drive |
TPU 87A Bir Bakışta
Güçlü Yönleri
- Very soft and flexible — Shore 87A
- Ideal for gaskets, seals, soft grips
- Excellent shock absorption
- Stretches 500%+ before breaking
Zayıf Yönleri
- Direct drive extruder required
- Extremely slow print speeds
- Very difficult to control retraction
- Prone to jamming in Bowden tubes
Kişiselleştirilmiş yapay zeka ayarları ister misin?
Tam kurulumunu ve ne yazdırdığını açıkla. 3DSearch'ün yapay zeka uzmanı saniyeler içinde TPU 87A ile Markforged FX10 için özel slicer ayarları oluşturuyor.
3DSearch'ü dene →Kaynaklar: Based on manufacturer specifications and community recommendations, community testing data, manufacturer recommended ranges. Değerler filament belirtimleri ve yazıcı donanım sınırlarından hesaplanmıştır.