ASA Settings for Markforged FX10
Recommended slicer settings for printing ASA on the Markforged FX10 (400 x 330 x 315 mm build volume, 250 mm/s max speed, direct drive extruder).
Uyumlu Değilintermediate
Uyumlu Değil
The max bed temperature of 0°C is below the recommended 90°C for ASA. Adhesion may be poor without additional bed adhesion aids.
| Filament Nozzle Requirement | 240-260°C |
| Printer Max Nozzle | 300°C |
| Filament Bed Requirement | 90-110°C |
| Printer Max Bed | N/A |
Bunun yerine yapılması gerekenler
- Your printer's bed maxes out at 0°C, but ASA needs at least 90°C for reliable adhesion.
- Try a compatible filament for your Markforged FX10 — PLA, PETG, and ABS are good options.
- If you need ASA specifically, you'll need a printer with a hotend capable of 240°C+ nozzle.
ASA Requirements
ASA Properties
| Nozzle Range | 240-260°C |
| Bed Range | 90-110°C |
| Speed Range | 40-60 mm/s |
| Difficulty | intermediate |
| Enclosure | Required |
| Drying | 77°C / 4h |
Markforged FX10 Specs
| Build Volume | 400 x 330 x 315 mm |
| Max Speed | 250 mm/s |
| Max Nozzle Temp | 300°C |
| Max Bed Temp | N/A |
| Extruder | Direct Drive |
ASA Bir Bakışta
Güçlü Yönleri
- Best UV resistance of common filaments (10x better than ABS)
- Excellent for outdoor functional parts
- Does not yellow or become brittle in sunlight
- Good impact resistance (similar to ABS)
- Good heat resistance (softens ~100C)
Zayıf Yönleri
- Requires enclosure (like ABS)
- Emits fumes (similar to ABS)
- More expensive than ABS
- Still prone to warping without enclosure
Kişiselleştirilmiş yapay zeka ayarları ister misin?
Tam kurulumunu ve ne yazdırdığını açıkla. 3DSearch'ün yapay zeka uzmanı saniyeler içinde ASA ile Markforged FX10 için özel slicer ayarları oluşturuyor.
3DSearch'ü dene →Kaynaklar: Based on manufacturer specifications and community recommendations, community testing data, manufacturer recommended ranges. Değerler filament belirtimleri ve yazıcı donanım sınırlarından hesaplanmıştır.