PEI / ULTEM Settings for UltiMaker S6
Recommended slicer settings for printing PEI / ULTEM on the UltiMaker S6 (330 x 240 x 300 mm build volume, 300 mm/s max speed, direct drive extruder).
互換性なしadvanced
互換性なし
The UltiMaker S6 has a max nozzle temperature of 280°C, which may be below the minimum recommended 350°C for PEI / ULTEM. Printing may be possible at the lower end of the temperature range but results may be suboptimal.
| Filament Nozzle Requirement | 350-400°C |
| Printer Max Nozzle | 280°C |
| Filament Bed Requirement | 130-160°C |
| Printer Max Bed | 140°C |
代わりにすること
- Your printer's hotend maxes out at 280°C, but PEI / ULTEM needs at least 350°C. No amount of tuning can overcome this hardware limitation.
- Try a compatible filament for your UltiMaker S6 — PLA, PETG, and ABS are good options.
- If you need PEI / ULTEM specifically, you'll need a printer with an all-metal hotend rated for 350°C+ nozzle and 130°C+ heated bed.
PEI / ULTEM Requirements
PEI / ULTEM Properties
| Nozzle Range | 350-400°C |
| Bed Range | 130-160°C |
| Speed Range | 15-30 mm/s |
| Difficulty | advanced |
| Enclosure | Required |
| Drying | 150°C / 8h |
UltiMaker S6 Specs
| Build Volume | 330 x 240 x 300 mm |
| Max Speed | 300 mm/s |
| Max Nozzle Temp | 280°C |
| Max Bed Temp | 140°C |
| Extruder | Direct Drive |
PEI / ULTEM一目でわかる
強み
- Flame retardant — self-extinguishing
- Excellent heat resistance (200°C+ continuous)
- Used in aerospace and automotive
- Good chemical resistance
弱点
- Requires specialized industrial printer
- Very expensive (~$200-500/kg)
- Needs heated enclosure at 120°C+
- Extremely limited availability
パーソナライズされたAI設定が欲しいですか？
あなたの正確なセットアップと印刷内容を説明してください。3DSearchのAIエキスパートが数秒であなたのUltiMaker S6用のPEI / ULTEMカスタムスライサー設定を生成します。
3DSearchを試す →ソース: Based on manufacturer specifications and community recommendations, community testing data, manufacturer recommended ranges. フィラメント仕様とプリンターハードウェア制限から計算。