Bronze-fill PLA Settings for Markforged Onyx Pro
Recommended slicer settings for printing Bronze-fill PLA on the Markforged Onyx Pro (320 x 132 x 154 mm build volume, 200 mm/s max speed, direct drive extruder).
Não Compatívelintermediate
Não Compatível
The max bed temperature of 0°C is below the recommended 50°C for Bronze-fill PLA. Adhesion may be poor without additional bed adhesion aids.
| Filament Nozzle Requirement | 195-220°C |
| Printer Max Nozzle | 280°C |
| Filament Bed Requirement | 50-60°C |
| Printer Max Bed | N/A |
O que fazer em vez disso
- Your printer's bed maxes out at 0°C, but Bronze-fill PLA needs at least 50°C for reliable adhesion.
- Try a compatible filament for your Markforged Onyx Pro — PLA, PETG, and ABS are good options.
- If you need Bronze-fill PLA specifically, you'll need a printer with a hotend capable of 195°C+ nozzle.
Bronze-fill PLA Requirements
Bronze-fill PLA Properties
| Nozzle Range | 195-220°C |
| Bed Range | 50-60°C |
| Speed Range | 20-40 mm/s |
| Difficulty | intermediate |
| Enclosure | Not needed |
| Drying | Not required |
Markforged Onyx Pro Specs
| Build Volume | 320 x 132 x 154 mm |
| Max Speed | 200 mm/s |
| Max Nozzle Temp | 280°C |
| Max Bed Temp | N/A |
| Extruder | Direct Drive |
Bronze-fill PLA em Primeiro Lugar
Forças
- Contains real bronze particles
- Can be polished and patinated for antique look
- Significantly heavier than standard PLA
- Excellent for statues and decorative art
Fraquezas
- Hardened nozzle recommended
- Slow print speeds required
- Expensive
- Brittle — not for functional parts
Quer configurações de IA personalizadas?
Descreva sua configuração exata e o que está imprimindo. O especialista em IA do 3DSearch gera configurações personalizadas do slicer para seu Markforged Onyx Pro com Bronze-fill PLA em segundos.
Experimente 3DSearch →Fontes: Based on manufacturer specifications and community recommendations, community testing data, manufacturer recommended ranges. Valores calculados a partir de especificações de filamento e limites de hardware da impressora.