PLA Settings for Markforged X7
Recommended slicer settings for printing PLA on the Markforged X7 (330 x 270 x 200 mm build volume, 200 mm/s max speed, direct drive extruder).
互換性なしbeginner
互換性なし
The max bed temperature of 0°C is below the recommended 50°C for PLA. Adhesion may be poor without additional bed adhesion aids.
| Filament Nozzle Requirement | 190-220°C |
| Printer Max Nozzle | 300°C |
| Filament Bed Requirement | 50-60°C |
| Printer Max Bed | N/A |
代わりにすること
- Your printer's bed maxes out at 0°C, but PLA needs at least 50°C for reliable adhesion.
- Try a compatible filament for your Markforged X7 — PLA, PETG, and ABS are good options.
- If you need PLA specifically, you'll need a printer with a hotend capable of 190°C+ nozzle.
PLA Requirements
PLA Properties
| Nozzle Range | 190-220°C |
| Bed Range | 50-60°C |
| Speed Range | 40-60 mm/s |
| Difficulty | beginner |
| Enclosure | Not needed |
| Drying | Not required |
Markforged X7 Specs
| Build Volume | 330 x 270 x 200 mm |
| Max Speed | 200 mm/s |
| Max Nozzle Temp | 300°C |
| Max Bed Temp | N/A |
| Extruder | Direct Drive |
PLA一目でわかる
強み
- Easiest filament to print with
- No heated bed strictly required (helps though)
- Wide range of colors available
- Low warping
- Biodegradable (derived from corn starch)
- Good tensile strength (47-60 MPa)
弱点
- Low heat resistance (softens at 55-60C)
- Brittle under impact
- Poor UV/outdoor resistance
- Not food-safe without coating
パーソナライズされたAI設定が欲しいですか？
あなたの正確なセットアップと印刷内容を説明してください。3DSearchのAIエキスパートが数秒であなたのMarkforged X7用のPLAカスタムスライサー設定を生成します。
3DSearchを試す →ソース: Based on manufacturer specifications and community recommendations, community testing data, manufacturer recommended ranges. フィラメント仕様とプリンターハードウェア制限から計算。