Wood PLA Settings for Markforged Onyx Pro
Recommended slicer settings for printing Wood PLA on the Markforged Onyx Pro (320 x 132 x 154 mm build volume, 200 mm/s max speed, direct drive extruder).
לא תואםintermediate
לא תואם
The max bed temperature of 0°C is below the recommended 40°C for Wood PLA. Adhesion may be poor without additional bed adhesion aids.
| Filament Nozzle Requirement | 180-210°C |
| Printer Max Nozzle | 280°C |
| Filament Bed Requirement | 40-60°C |
| Printer Max Bed | N/A |
מה לעשות במקום
- Your printer's bed maxes out at 0°C, but Wood PLA needs at least 40°C for reliable adhesion.
- Try a compatible filament for your Markforged Onyx Pro — PLA, PETG, and ABS are good options.
- If you need Wood PLA specifically, you'll need a printer with a hotend capable of 180°C+ nozzle.
Wood PLA Requirements
Wood PLA Properties
| Nozzle Range | 180-210°C |
| Bed Range | 40-60°C |
| Speed Range | 30-50 mm/s |
| Difficulty | intermediate |
| Enclosure | Not needed |
| Drying | Not required |
Markforged Onyx Pro Specs
| Build Volume | 320 x 132 x 154 mm |
| Max Speed | 200 mm/s |
| Max Nozzle Temp | 280°C |
| Max Bed Temp | N/A |
| Extruder | Direct Drive |
Wood PLA במבט מהיר
יתרונות
- Real wood-like appearance and feel
- Can be sanded, stained, and finished like real wood
- Temperature controls color (lower=lighter, higher=darker)
- Does not require hardened nozzle
- Great for decorative and artistic prints
חסרונות
- Prone to clogging (use 0.6mm nozzle recommended)
- Do not leave filament sitting hot in nozzle (chars)
- Inconsistent color (but adds to wood look)
- Slower print speeds needed
- Not for structural or functional parts
רוצה הגדרות AI מותאמות אישית?
תאר את ההגדרה המדויקת שלך ואת מה שאתה מדפיס. מומחה ה-AI של 3DSearch מייצר הגדרות סלייסר מותאמות עבור ה-Markforged Onyx Pro שלך עם Wood PLA תוך שניות.
נסה את 3DSearch →מקורות: Based on manufacturer specifications and community recommendations, community testing data, manufacturer recommended ranges. הערכים חושבו ממפרטי הפילמנט וממגבלות החומרה של המדפסת.