Silk PLA Settings for Markforged Onyx Pro
Recommended slicer settings for printing Silk PLA on the Markforged Onyx Pro (320 x 132 x 154 mm build volume, 200 mm/s max speed, direct drive extruder).
לא תואםbeginner
לא תואם
The max bed temperature of 0°C is below the recommended 60°C for Silk PLA. Adhesion may be poor without additional bed adhesion aids.
| Filament Nozzle Requirement | 215-230°C |
| Printer Max Nozzle | 280°C |
| Filament Bed Requirement | 60-70°C |
| Printer Max Bed | N/A |
מה לעשות במקום
- Your printer's bed maxes out at 0°C, but Silk PLA needs at least 60°C for reliable adhesion.
- Try a compatible filament for your Markforged Onyx Pro — PLA, PETG, and ABS are good options.
- If you need Silk PLA specifically, you'll need a printer with a hotend capable of 215°C+ nozzle.
Silk PLA Requirements
Silk PLA Properties
| Nozzle Range | 215-230°C |
| Bed Range | 60-70°C |
| Speed Range | 30-50 mm/s |
| Difficulty | beginner |
| Enclosure | Not needed |
| Drying | Not required |
Markforged Onyx Pro Specs
| Build Volume | 320 x 132 x 154 mm |
| Max Speed | 200 mm/s |
| Max Nozzle Temp | 280°C |
| Max Bed Temp | N/A |
| Extruder | Direct Drive |
Silk PLA במבט מהיר
יתרונות
- Beautiful glossy, metallic-like finish
- Very popular for decorative prints
- Available in many vibrant colors
- Easy to print (PLA base)
- Stunning visual results with minimal effort
חסרונות
- More brittle than regular PLA
- Not suitable for functional parts (purely decorative)
- Medium speeds needed for best sheen
- Slightly higher print temperature than PLA
רוצה הגדרות AI מותאמות אישית?
תאר את ההגדרה המדויקת שלך ואת מה שאתה מדפיס. מומחה ה-AI של 3DSearch מייצר הגדרות סלייסר מותאמות עבור ה-Markforged Onyx Pro שלך עם Silk PLA תוך שניות.
נסה את 3DSearch →מקורות: Based on manufacturer specifications and community recommendations, community testing data, manufacturer recommended ranges. הערכים חושבו ממפרטי הפילמנט וממגבלות החומרה של המדפסת.