Wood PLA Settings for Markforged Onyx Pro
Recommended slicer settings for printing Wood PLA on the Markforged Onyx Pro (320 x 132 x 154 mm build volume, 200 mm/s max speed, direct drive extruder).
Non compatibleintermediate
Non compatible
The max bed temperature of 0°C is below the recommended 40°C for Wood PLA. Adhesion may be poor without additional bed adhesion aids.
| Filament Nozzle Requirement | 180-210°C |
| Printer Max Nozzle | 280°C |
| Filament Bed Requirement | 40-60°C |
| Printer Max Bed | N/A |
Que faire à la place
- Your printer's bed maxes out at 0°C, but Wood PLA needs at least 40°C for reliable adhesion.
- Try a compatible filament for your Markforged Onyx Pro — PLA, PETG, and ABS are good options.
- If you need Wood PLA specifically, you'll need a printer with a hotend capable of 180°C+ nozzle.
Wood PLA Requirements
Wood PLA Properties
| Nozzle Range | 180-210°C |
| Bed Range | 40-60°C |
| Speed Range | 30-50 mm/s |
| Difficulty | intermediate |
| Enclosure | Not needed |
| Drying | Not required |
Markforged Onyx Pro Specs
| Build Volume | 320 x 132 x 154 mm |
| Max Speed | 200 mm/s |
| Max Nozzle Temp | 280°C |
| Max Bed Temp | N/A |
| Extruder | Direct Drive |
Wood PLA en un coup d'œil
Points forts
- Real wood-like appearance and feel
- Can be sanded, stained, and finished like real wood
- Temperature controls color (lower=lighter, higher=darker)
- Does not require hardened nozzle
- Great for decorative and artistic prints
Points faibles
- Prone to clogging (use 0.6mm nozzle recommended)
- Do not leave filament sitting hot in nozzle (chars)
- Inconsistent color (but adds to wood look)
- Slower print speeds needed
- Not for structural or functional parts
Tu veux des réglages IA personnalisés ?
Décris ton setup exact et ce que tu imprimes. L'expert IA de 3DSearch génère des réglages de slicer sur mesure pour ton Markforged Onyx Pro avec Wood PLA en quelques secondes.
Essayer 3DSearch →Sources : Based on manufacturer specifications and community recommendations, community testing data, manufacturer recommended ranges. Valeurs calculées à partir des spécifications du filament et des limites matérielles de l'imprimante.