High Speed PLA Settings for Markforged Onyx Pro
Recommended slicer settings for printing High Speed PLA on the Markforged Onyx Pro (320 x 132 x 154 mm build volume, 200 mm/s max speed, direct drive extruder).
Non compatiblebeginner
Non compatible
The max bed temperature of 0°C is below the recommended 45°C for High Speed PLA. Adhesion may be poor without additional bed adhesion aids.
| Filament Nozzle Requirement | 190-230°C |
| Printer Max Nozzle | 280°C |
| Filament Bed Requirement | 45-60°C |
| Printer Max Bed | N/A |
Que faire à la place
- Your printer's bed maxes out at 0°C, but High Speed PLA needs at least 45°C for reliable adhesion.
- Try a compatible filament for your Markforged Onyx Pro — PLA, PETG, and ABS are good options.
- If you need High Speed PLA specifically, you'll need a printer with a hotend capable of 190°C+ nozzle.
High Speed PLA Requirements
High Speed PLA Properties
| Nozzle Range | 190-230°C |
| Bed Range | 45-60°C |
| Speed Range | 150-300 mm/s |
| Difficulty | beginner |
| Enclosure | Not needed |
| Drying | Not required |
Markforged Onyx Pro Specs
| Build Volume | 320 x 132 x 154 mm |
| Max Speed | 200 mm/s |
| Max Nozzle Temp | 280°C |
| Max Bed Temp | N/A |
| Extruder | Direct Drive |
High Speed PLA en un coup d'œil
Points forts
- Prints 3-5x faster than standard PLA
- Maintains good quality at high speeds
- Lower viscosity for better flow
- Great for rapid prototyping
Points faibles
- Requires printer capable of high speeds
- May need higher flow rate calibration
- Slightly reduced detail at extreme speeds
Tu veux des réglages IA personnalisés ?
Décris ton setup exact et ce que tu imprimes. L'expert IA de 3DSearch génère des réglages de slicer sur mesure pour ton Markforged Onyx Pro avec High Speed PLA en quelques secondes.
Essayer 3DSearch →Sources : Based on manufacturer specifications and community recommendations, community testing data, manufacturer recommended ranges. Valeurs calculées à partir des spécifications du filament et des limites matérielles de l'imprimante.