PAHT-CF Settings for Creality CR-6 SE
Recommended slicer settings for printing PAHT-CF on the Creality CR-6 SE (235 x 235 x 250 mm build volume, 100 mm/s max speed, Bowden extruder).
Non compatibleadvanced
Non compatible
The Creality CR-6 SE has a max nozzle temperature of 260°C, which may be below the minimum recommended 280°C for PAHT-CF. Printing may be possible at the lower end of the temperature range but results may be suboptimal.
| Filament Nozzle Requirement | 280-310°C |
| Printer Max Nozzle | 260°C |
| Filament Bed Requirement | 100-120°C |
| Printer Max Bed | 110°C |
Que faire à la place
- Your printer's hotend maxes out at 260°C, but PAHT-CF needs at least 280°C. No amount of tuning can overcome this hardware limitation.
- Try a compatible filament for your Creality CR-6 SE — PLA, PETG, and ABS are good options.
- If you need PAHT-CF specifically, you'll need a printer with a hotend capable of 280°C+ nozzle and 100°C+ heated bed.
PAHT-CF Requirements
PAHT-CF Properties
| Nozzle Range | 280-310°C |
| Bed Range | 100-120°C |
| Speed Range | 25-45 mm/s |
| Difficulty | advanced |
| Enclosure | Required |
| Drying | 90°C / 12h |
Creality CR-6 SE Specs
| Build Volume | 235 x 235 x 250 mm |
| Max Speed | 100 mm/s |
| Max Nozzle Temp | 260°C |
| Max Bed Temp | 110°C |
| Extruder | Bowden |
PAHT-CF en un coup d'œil
Points forts
- Heat resistance up to 180°C
- Exceptional stiffness-to-weight ratio
- Best carbon fiber nylon for high-temp applications
- Good chemical resistance
Points faibles
- Requires high-temp all-metal hotend (300°C+)
- Hardened nozzle mandatory
- Must print from heated dry box
- Very expensive (~$60-100/kg)
Tu veux des réglages IA personnalisés ?
Décris ton setup exact et ce que tu imprimes. L'expert IA de 3DSearch génère des réglages de slicer sur mesure pour ton Creality CR-6 SE avec PAHT-CF en quelques secondes.
Essayer 3DSearch →Sources : Based on Creality support documentation, community testing data, manufacturer recommended ranges. Valeurs calculées à partir des spécifications du filament et des limites matérielles de l'imprimante.