PEI / ULTEM Settings for Bambu Lab H2C
Recommended slicer settings for printing PEI / ULTEM on the Bambu Lab H2C (330 x 320 x 325 mm build volume, 1000 mm/s max speed, direct drive extruder).
Non compatibleadvanced
Non compatible
The max bed temperature of 120°C is below the recommended 130°C for PEI / ULTEM. Adhesion may be poor without additional bed adhesion aids.
| Filament Nozzle Requirement | 350-400°C |
| Printer Max Nozzle | 350°C |
| Filament Bed Requirement | 130-160°C |
| Printer Max Bed | 120°C |
Que faire à la place
- Your printer's bed maxes out at 120°C, but PEI / ULTEM needs at least 130°C for reliable adhesion.
- Try a compatible filament for your Bambu Lab H2C — PLA, PETG, and ABS are good options.
- If you need PEI / ULTEM specifically, you'll need a printer with an all-metal hotend rated for 350°C+ nozzle and 130°C+ heated bed.
PEI / ULTEM Requirements
PEI / ULTEM Properties
| Nozzle Range | 350-400°C |
| Bed Range | 130-160°C |
| Speed Range | 15-30 mm/s |
| Difficulty | advanced |
| Enclosure | Required |
| Drying | 150°C / 8h |
Bambu Lab H2C Specs
| Build Volume | 330 x 320 x 325 mm |
| Max Speed | 1000 mm/s |
| Max Nozzle Temp | 350°C |
| Max Bed Temp | 120°C |
| Extruder | Direct Drive |
PEI / ULTEM en un coup d'œil
Points forts
- Flame retardant — self-extinguishing
- Excellent heat resistance (200°C+ continuous)
- Used in aerospace and automotive
- Good chemical resistance
Points faibles
- Requires specialized industrial printer
- Very expensive (~$200-500/kg)
- Needs heated enclosure at 120°C+
- Extremely limited availability
Tu veux des réglages IA personnalisés ?
Décris ton setup exact et ce que tu imprimes. L'expert IA de 3DSearch génère des réglages de slicer sur mesure pour ton Bambu Lab H2C avec PEI / ULTEM en quelques secondes.
Essayer 3DSearch →Sources : Based on Bambu Lab Wiki (wiki.bambulab.com), community testing data, manufacturer recommended ranges. Valeurs calculées à partir des spécifications du filament et des limites matérielles de l'imprimante.