PEEK Settings for Bambu Lab H2C
Recommended slicer settings for printing PEEK on the Bambu Lab H2C (330 x 320 x 325 mm build volume, 1000 mm/s max speed, direct drive extruder).
Non compatible
The Bambu Lab H2C has a max nozzle temperature of 350°C, which may be below the minimum recommended 370°C for PEEK. Printing may be possible at the lower end of the temperature range but results may be suboptimal. The max bed temperature of 120°C is below the recommended 130°C for PEEK. Adhesion may be poor without additional bed adhesion aids.
| Filament Nozzle Requirement | 370-420°C |
| Printer Max Nozzle | 350°C |
| Filament Bed Requirement | 130-160°C |
| Printer Max Bed | 120°C |
Que faire à la place
- Your printer's hotend maxes out at 350°C, but PEEK needs at least 370°C. No amount of tuning can overcome this hardware limitation.
- Your printer's bed maxes out at 120°C, but PEEK needs at least 130°C for reliable adhesion.
- Try a compatible filament for your Bambu Lab H2C — PLA, PETG, and ABS are good options.
- If you need PEEK specifically, you'll need a printer with an all-metal hotend rated for 370°C+ nozzle and 130°C+ heated bed.
PEEK Requirements
PEEK Properties
| Nozzle Range | 370-420°C |
| Bed Range | 130-160°C |
| Speed Range | 15-30 mm/s |
| Difficulty | advanced |
| Enclosure | Required |
| Drying | 150°C / 6h |
Bambu Lab H2C Specs
| Build Volume | 330 x 320 x 325 mm |
| Max Speed | 1000 mm/s |
| Max Nozzle Temp | 350°C |
| Max Bed Temp | 120°C |
| Extruder | Direct Drive |
PEEK en un coup d'œil
Points forts
- Heat resistance up to 250°C continuous
- Exceptional chemical resistance
- Aerospace and medical grade material
- Biocompatible grades available
Points faibles
- Requires specialized printer (400°C+ hotend, heated enclosure)
- Extremely expensive (~$300-700/kg)
- Needs heated chamber at 120°C+
- Cannot be printed on consumer-grade machines
Tu veux des réglages IA personnalisés ?
Décris ton setup exact et ce que tu imprimes. L'expert IA de 3DSearch génère des réglages de slicer sur mesure pour ton Bambu Lab H2C avec PEEK en quelques secondes.
Essayer 3DSearch →Sources : Based on Bambu Lab Wiki (wiki.bambulab.com), community testing data, manufacturer recommended ranges. Valeurs calculées à partir des spécifications du filament et des limites matérielles de l'imprimante.