PC Settings for Anycubic Kobra 2 Max
Recommended slicer settings for printing PC on the Anycubic Kobra 2 Max (420 x 420 x 500 mm build volume, 300 mm/s max speed, direct drive extruder).
No Compatibleadvanced
No Compatible
The max bed temperature of 90°C is below the recommended 100°C for PC. Adhesion may be poor without additional bed adhesion aids.
| Filament Nozzle Requirement | 260-310°C |
| Printer Max Nozzle | 260°C |
| Filament Bed Requirement | 100-120°C |
| Printer Max Bed | 90°C |
Qué hacer en su lugar
- Your printer's bed maxes out at 90°C, but PC needs at least 100°C for reliable adhesion.
- Try a compatible filament for your Anycubic Kobra 2 Max — PLA, PETG, and ABS are good options.
- If you need PC specifically, you'll need a printer with a hotend capable of 260°C+ nozzle and 100°C+ heated bed.
PC Requirements
PC Properties
| Nozzle Range | 260-310°C |
| Bed Range | 100-120°C |
| Speed Range | 20-40 mm/s |
| Difficulty | advanced |
| Enclosure | Required |
| Drying | 80°C / 10h |
Anycubic Kobra 2 Max Specs
| Build Volume | 420 x 420 x 500 mm |
| Max Speed | 300 mm/s |
| Max Nozzle Temp | 260°C |
| Max Bed Temp | 90°C |
| Extruder | Direct Drive |
PC de un Vistazo
Fortalezas
- Arguably the toughest non-flexible filament
- Excellent heat resistance (softens ~150C)
- Can withstand repeated impacts without shattering
- Can print in translucent/clear
- Ideal for protective equipment and high-temp parts
Debilidades
- Requires all-metal hotend
- Severe warping without heated enclosure
- Very high printing temperatures
- High moisture sensitivity
- Most demanding common filament to print
¿Quieres configuraciones de IA personalizadas?
Describe tu configuración exacta y qué estás imprimiendo. El experto en IA de 3DSearch genera configuraciones de slicer personalizadas para tu Anycubic Kobra 2 Max con PC en segundos.
Prueba 3DSearch →Fuentes: Based on manufacturer specifications and community recommendations, community testing data, manufacturer recommended ranges. Valores calculados a partir de especificaciones de filamento y límites de hardware de impresora.