PA6 Settings for Monoprice MP Select Mini
Recommended slicer settings for printing PA6 on the Monoprice MP Select Mini (120 x 120 x 120 mm build volume, 55 mm/s max speed, Bowden extruder).
Nicht kompatibeladvanced
Nicht kompatibel
The max bed temperature of 60°C is below the recommended 80°C for PA6. Adhesion may be poor without additional bed adhesion aids.
| Filament Nozzle Requirement | 240-270°C |
| Printer Max Nozzle | 260°C |
| Filament Bed Requirement | 80-100°C |
| Printer Max Bed | 60°C |
Was du stattdessen tun kannst
- Your printer's bed maxes out at 60°C, but PA6 needs at least 80°C for reliable adhesion.
- Try a compatible filament for your Monoprice MP Select Mini — PLA, PETG, and ABS are good options.
- If you need PA6 specifically, you'll need a printer with a hotend capable of 240°C+ nozzle.
PA6 Requirements
PA6 Properties
| Nozzle Range | 240-270°C |
| Bed Range | 80-100°C |
| Speed Range | 30-50 mm/s |
| Difficulty | advanced |
| Enclosure | Required |
| Drying | 85°C / 12h |
Monoprice MP Select Mini Specs
| Build Volume | 120 x 120 x 120 mm |
| Max Speed | 55 mm/s |
| Max Nozzle Temp | 260°C |
| Max Bed Temp | 60°C |
| Extruder | Bowden |
PA6 auf einen Blick
Stärken
- Strongest common nylon variant
- Exceptional wear and fatigue resistance
- Good chemical resistance
- Excellent for gears, bearings, hinges
Schwächen
- Extremely hygroscopic — must dry extensively
- Warps aggressively without enclosure
- Difficult bed adhesion
- Shrinks significantly during cooling
Möchtest du personalisierte KI-Einstellungen?
Beschreibe dein genaues Setup und was du druckst. 3DSearch's KI-Experte erzeugt in Sekunden individuelle Slicer-Einstellungen für deinen Monoprice MP Select Mini mit PA6.
3DSearch ausprobieren →Quellen: Based on manufacturer specifications and community recommendations, community testing data, manufacturer recommended ranges. Werte berechnet aus Filament-Spezifikationen und Drucker-Hardware-Limits.