PAHT-CF Settings for Creality CR-10 SE
Recommended slicer settings for printing PAHT-CF on the Creality CR-10 SE (220 x 220 x 265 mm build volume, 600 mm/s max speed, direct drive extruder).
Slicer-Konfiguration
Kopiere diese Werte in deinen Slicer (Cura, OrcaSlicer, PrusaSlicer, Bambu Studio)| Einstellung | Wert | Bereich |
|---|---|---|
| Düsentemperatur | 295°C | 280-310°C |
| Heizbetttemperatur | 100°C | 100-120°C |
| Erste Schicht Düse | 300°C | +5°C above normal |
| Erste Schicht Heizbett | 100°C | At printer max |
| Druckgeschwindigkeit | 35 mm/s | 25-45 mm/s |
| Erste Schicht Geschwindigkeit | 15 mm/s | 25-50% of normal |
| Wandgeschwindigkeit | 26 mm/s | 70-80% of normal |
| Verfahrgeschwindigkeit | 68 mm/s | 120-150% of print speed |
| Schichthöhe | 0.2mm | 0.12-0.28mm |
| Infill | 15-20% | 10-30% |
| Wandanzahl | 2-3 | Perimeters/shells |
| Oben/Unten Schichten | 3-4 | Solid layers |
| Kühlventilator | 100% | From layer 2+ |
| Rückzugsdistanz | 0.8-1.2 mm | Direct drive |
| Rückzugsgeschwindigkeit | 40 mm/s | Direct drive |
Vor dem Drucken
Druckqualität Profile
Three presets for common use cases with PAHT-CF on the Creality CR-10 SE.
| Profile | Layer Height | Speed | Infill | Best For |
|---|---|---|---|---|
| Draft | 0.28mm | 45 mm/s | 10-15% | Rapid prototyping, test fits |
| Standard | 0.20mm | 35 mm/s | 15-20% | General purpose, everyday prints |
| Quality | 0.12mm | 25 mm/s | 20-30% | Miniatures, display pieces, fine detail |
Haftung des Heizbetts
PAHT Carbon Fiber haftet gut auf PEI-Blechen aber braucht höhere Temperaturen. Verwende strukturiertes PEI oder Garolite. Ein Brim wird empfohlen.
Temperatur-Abstimmungsanleitung
Nozzle: 295°C
Range: 280-310°C. Printer max: 300°C.
- Poor layer adhesion? Increase +5°C
- Stringing or oozing? Decrease -5°C
- Print a temperature tower to find your exact sweet spot
Bed: 100°C
Range: 100-120°C. Printer max: 100°C.
- First layer lifting? Increase +5°C
- Elephant's foot? Decrease -5°C
- Let the bed fully preheat before starting
Fehlerbehebung PAHT-CF auf Creality CR-10 SE
Pro-Tipps für PAHT-CF
PAHT Carbon Fiber ist hochtemperatur und hochperformance-Material
Drucke bei 280-310°C - viel höher als die meisten Materialien
Verwende ein beheiztes Gehäuse für beste Ergebnisse
Das Material ist ideal für Teile, die Hitze und Biegung aushalten müssen
Trockne gründlich - Polyamide sind hygroskopisch
Support-Einstellungen
For prints requiring supports with PAHT-CF, use tree supports for easier removal and less scarring. Set a 0.15-0.2mm Z-distance between support and model. If you have a dual-extruder setup, consider PVA (for PLA/PETG) or HIPS (for ABS) as dedicated water/solvent-soluble support material.
Creality CR-10 SE Specs
| Build Volume | 220 x 220 x 265 mm |
| Max Speed | 600 mm/s |
| Max Nozzle Temp | 300°C |
| Max Bed Temp | 100°C |
| Extruder | Direct Drive |
PAHT-CF Properties
| Nozzle Range | 280-310°C |
| Bed Range | 100-120°C |
| Speed Range | 25-45 mm/s |
| Difficulty | advanced |
| Drying | 90°C / 12h |
| Enclosure | Recommended |
PAHT-CF auf einen Blick
Stärken
- Heat resistance up to 180°C
- Exceptional stiffness-to-weight ratio
- Best carbon fiber nylon for high-temp applications
- Good chemical resistance
Schwächen
- Requires high-temp all-metal hotend (300°C+)
- Hardened nozzle mandatory
- Must print from heated dry box
- Very expensive (~$60-100/kg)
Möchtest du personalisierte KI-Einstellungen?
Beschreibe dein genaues Setup und was du druckst. 3DSearch's KI-Experte erzeugt in Sekunden individuelle Slicer-Einstellungen für deinen Creality CR-10 SE mit PAHT-CF.
3DSearch ausprobieren →Quellen: Based on Creality support documentation, community testing data, manufacturer recommended ranges. Werte berechnet aus Filament-Spezifikationen und Drucker-Hardware-Limits.