TPU 95A Settings for Creality Ender 3 Pro
Recommended slicer settings for printing TPU 95A on the Creality Ender 3 Pro (220 x 220 x 250 mm build volume, 180 mm/s max speed, Bowden extruder).
切片配置
将这些参数复制到你的切片软件（Cura、OrcaSlicer、PrusaSlicer、Bambu Studio）| 参数 | 数值 | 范围 |
|---|---|---|
| 喷嘴温度 | 223°C | 210-235°C |
| 热床温度 | 50°C | 40-60°C |
| 首层喷嘴 | 228°C | +5°C above normal |
| 首层热床 | 55°C | +5°C above normal |
| 打印速度 | 23 mm/s | 15-30 mm/s |
| 首层速度 | 15 mm/s | 25-50% of normal |
| 外壁速度 | 17 mm/s | 70-80% of normal |
| 空走速度 | 45 mm/s | 120-150% of print speed |
| 层高 | 0.2mm | 0.12-0.28mm |
| Infill | 15-20% | 10-30% |
| 壁数 | 3-4 | Perimeters/shells |
| 顶层/底层 | 5-6 | Solid layers |
| 散热风扇 | 100% | From layer 2+ |
| 回抽距离 | 4-6 mm | Bowden |
| 回抽速度 | 40 mm/s | Bowden |
开始打印前
打印质量预设
Three presets for common use cases with TPU 95A on the Creality Ender 3 Pro.
| Profile | Layer Height | Speed | Infill | Best For |
|---|---|---|---|---|
| Draft | 0.28mm | 30 mm/s | 10-15% | Rapid prototyping, test fits |
| Standard | 0.20mm | 23 mm/s | 15-20% | General purpose, everyday prints |
| Quality | 0.12mm | 15 mm/s | 20-30% | Miniatures, display pieces, fine detail |
热床附着
TPU 95A(Shore 95A)粘合良好到大多数表面,包括 PEI 片、蓝色美纹纸和带胶棒的玻璃。粘合很少是问题 -- 灵活性帮助它抓住热床。
温度调校指南
Nozzle: 223°C
Range: 210-235°C. Printer max: 260°C.
- Poor layer adhesion? Increase +5°C
- Stringing or oozing? Decrease -5°C
- Print a temperature tower to find your exact sweet spot
Bed: 50°C
Range: 40-60°C. Printer max: 110°C.
- First layer lifting? Increase +5°C
- Elephant's foot? Decrease -5°C
- Let the bed fully preheat before starting
在 Creality Ender 3 Pro 上打印 TPU 95A 的问题排查
TPU 95A 使用技巧
Shore 95A 是最常见且最容易打印的 TPU -- 如果是柔性耗材新手,从这里开始
速度是一切:最多 20-40 mm/s,对于复杂几何更慢
最小化回抽(直接驱动 0.5-1mm) -- 过度回抽卡顿柔性耗材
在湿度大的气候下干燥后使用;TPU 是吸水性的
支撑设置
For prints requiring supports with TPU 95A, use tree supports for easier removal and less scarring. Set a 0.15-0.2mm Z-distance between support and model. If you have a dual-extruder setup, consider PVA (for PLA/PETG) or HIPS (for ABS) as dedicated water/solvent-soluble support material.
Creality Ender 3 Pro Specs
| Build Volume | 220 x 220 x 250 mm |
| Max Speed | 180 mm/s |
| Max Nozzle Temp | 260°C |
| Max Bed Temp | 110°C |
| Extruder | Bowden |
TPU 95A Properties
| Nozzle Range | 210-235°C |
| Bed Range | 40-60°C |
| Speed Range | 15-30 mm/s |
| Difficulty | intermediate |
| Drying | 50°C / 5h |
| Enclosure | Not needed |
TPU 95A 速览
优势
- Standard flexible filament — Shore 95A hardness
- Good balance of flexibility and printability
- Excellent impact and abrasion resistance
- Stretches 300-500% before breaking
劣势
- Must print slowly
- Difficult on Bowden extruders — direct drive preferred
- Minimal retraction needed (causes jams)
- Stringing is common
想要个性化的 AI 参数？
描述你的具体配置和要打印的内容。3DSearch 的 AI 专家会在几秒内为你的 Creality Ender 3 Pro 搭配 TPU 95A 生成定制切片参数。
试用 3DSearch →来源： Based on Creality support documentation, community testing data, manufacturer recommended ranges. 参数根据耗材规格和打印机硬件上限计算得出。