HIPS Settings for Bambu Lab A1 Mini
Recommended slicer settings for printing HIPS on the Bambu Lab A1 Mini (180 x 180 x 180 mm build volume, 500 mm/s max speed, direct drive extruder).
Uyumlu Değilintermediate
Uyumlu Değil
The max bed temperature of 80°C is below the recommended 90°C for HIPS. Adhesion may be poor without additional bed adhesion aids.
| Filament Nozzle Requirement | 230-245°C |
| Printer Max Nozzle | 300°C |
| Filament Bed Requirement | 90-110°C |
| Printer Max Bed | 80°C |
Bunun yerine yapılması gerekenler
- Your printer's bed maxes out at 80°C, but HIPS needs at least 90°C for reliable adhesion.
- Try a compatible filament for your Bambu Lab A1 Mini — PLA, PETG, and ABS are good options.
- If you need HIPS specifically, you'll need a printer with a hotend capable of 230°C+ nozzle.
HIPS Requirements
HIPS Properties
| Nozzle Range | 230-245°C |
| Bed Range | 90-110°C |
| Speed Range | 40-50 mm/s |
| Difficulty | intermediate |
| Enclosure | Required |
| Drying | Not required |
Bambu Lab A1 Mini Specs
| Build Volume | 180 x 180 x 180 mm |
| Max Speed | 500 mm/s |
| Max Nozzle Temp | 300°C |
| Max Bed Temp | 80°C |
| Extruder | Direct Drive |
HIPS Bir Bakışta
Güçlü Yönleri
- Dissolves in D-Limonene (support material for ABS)
- Much cheaper than PVA ($20-25/kg)
- Low moisture sensitivity
- Can be used as standalone lightweight material
- Easy to paint and post-process
Zayıf Yönleri
- Requires D-Limonene solvent
- Only pairs well with ABS
- Needs enclosure (same as ABS)
- Less common than PVA for support use
Kişiselleştirilmiş yapay zeka ayarları ister misin?
Tam kurulumunu ve ne yazdırdığını açıkla. 3DSearch'ün yapay zeka uzmanı saniyeler içinde HIPS ile Bambu Lab A1 Mini için özel slicer ayarları oluşturuyor.
3DSearch'ü dene →Kaynaklar: Based on Bambu Lab Wiki (wiki.bambulab.com), community testing data, manufacturer recommended ranges. Değerler filament belirtimleri ve yazıcı donanım sınırlarından hesaplanmıştır.