PEEK Settings for QIDI Q2C
Recommended slicer settings for printing PEEK on the QIDI Q2C (270 x 270 x 256 mm build volume, 600 mm/s max speed, direct drive extruder).
Несовместимоadvanced
Несовместимо
The max bed temperature of 120°C is below the recommended 130°C for PEEK. Adhesion may be poor without additional bed adhesion aids.
| Filament Nozzle Requirement | 370-420°C |
| Printer Max Nozzle | 370°C |
| Filament Bed Requirement | 130-160°C |
| Printer Max Bed | 120°C |
Что делать вместо этого
- Your printer's bed maxes out at 120°C, but PEEK needs at least 130°C for reliable adhesion.
- Try a compatible filament for your QIDI Q2C — PLA, PETG, and ABS are good options.
- If you need PEEK specifically, you'll need a printer with an all-metal hotend rated for 370°C+ nozzle and 130°C+ heated bed.
PEEK Requirements
PEEK Properties
| Nozzle Range | 370-420°C |
| Bed Range | 130-160°C |
| Speed Range | 15-30 mm/s |
| Difficulty | advanced |
| Enclosure | Required |
| Drying | 150°C / 6h |
QIDI Q2C Specs
| Build Volume | 270 x 270 x 256 mm |
| Max Speed | 600 mm/s |
| Max Nozzle Temp | 370°C |
| Max Bed Temp | 120°C |
| Extruder | Direct Drive |
PEEK с первого взгляда
Сильные стороны
- Heat resistance up to 250°C continuous
- Exceptional chemical resistance
- Aerospace and medical grade material
- Biocompatible grades available
Слабые стороны
- Requires specialized printer (400°C+ hotend, heated enclosure)
- Extremely expensive (~$300-700/kg)
- Needs heated chamber at 120°C+
- Cannot be printed on consumer-grade machines
Хочешь персонализированные параметры ИИ?
Опиши свою точную конфигурацию и то, что ты печатаешь. Эксперт ИИ 3DSearch генерирует пользовательские параметры слайсера для твоего QIDI Q2C с PEEK за секунды.
Попробуй 3DSearch →Источники: Based on manufacturer specifications and community recommendations, community testing data, manufacturer recommended ranges. Значения рассчитаны на основе спецификаций филамента и ограничений аппаратного обеспечения принтера.