PC Settings for Creality Ender 3 V2
Recommended slicer settings for printing PC on the Creality Ender 3 V2 (220 x 220 x 250 mm build volume, 120 mm/s max speed, Bowden extruder).
Não Compatíveladvanced
Não Compatível
The Creality Ender 3 V2 has a max nozzle temperature of 255°C, which may be below the minimum recommended 260°C for PC. Printing may be possible at the lower end of the temperature range but results may be suboptimal.
| Filament Nozzle Requirement | 260-310°C |
| Printer Max Nozzle | 255°C |
| Filament Bed Requirement | 100-120°C |
| Printer Max Bed | 110°C |
O que fazer em vez disso
- Your printer's hotend maxes out at 255°C, but PC needs at least 260°C. No amount of tuning can overcome this hardware limitation.
- Try a compatible filament for your Creality Ender 3 V2 — PLA, PETG, and PLA+ are good options.
- If you need PC specifically, you'll need a printer with a hotend capable of 260°C+ nozzle and 100°C+ heated bed.
PC Requirements
PC Properties
| Nozzle Range | 260-310°C |
| Bed Range | 100-120°C |
| Speed Range | 20-40 mm/s |
| Difficulty | advanced |
| Enclosure | Required |
| Drying | 80°C / 10h |
Creality Ender 3 V2 Specs
| Build Volume | 220 x 220 x 250 mm |
| Max Speed | 120 mm/s |
| Max Nozzle Temp | 255°C |
| Max Bed Temp | 110°C |
| Extruder | Bowden |
PC em Primeiro Lugar
Forças
- Arguably the toughest non-flexible filament
- Excellent heat resistance (softens ~150C)
- Can withstand repeated impacts without shattering
- Can print in translucent/clear
- Ideal for protective equipment and high-temp parts
Fraquezas
- Requires all-metal hotend
- Severe warping without heated enclosure
- Very high printing temperatures
- High moisture sensitivity
- Most demanding common filament to print
Quer configurações de IA personalizadas?
Descreva sua configuração exata e o que está imprimindo. O especialista em IA do 3DSearch gera configurações personalizadas do slicer para seu Creality Ender 3 V2 com PC em segundos.
Experimente 3DSearch →Fontes: Based on Creality support documentation, community testing data, manufacturer recommended ranges. Valores calculados a partir de especificações de filamento e limites de hardware da impressora.