Wood PLA Settings for Markforged X7
Recommended slicer settings for printing Wood PLA on the Markforged X7 (330 x 270 x 200 mm build volume, 200 mm/s max speed, direct drive extruder).
互換性なしintermediate
互換性なし
The max bed temperature of 0°C is below the recommended 40°C for Wood PLA. Adhesion may be poor without additional bed adhesion aids.
| Filament Nozzle Requirement | 180-210°C |
| Printer Max Nozzle | 300°C |
| Filament Bed Requirement | 40-60°C |
| Printer Max Bed | N/A |
代わりにすること
- Your printer's bed maxes out at 0°C, but Wood PLA needs at least 40°C for reliable adhesion.
- Try a compatible filament for your Markforged X7 — PLA, PETG, and ABS are good options.
- If you need Wood PLA specifically, you'll need a printer with a hotend capable of 180°C+ nozzle.
Wood PLA Requirements
Wood PLA Properties
| Nozzle Range | 180-210°C |
| Bed Range | 40-60°C |
| Speed Range | 30-50 mm/s |
| Difficulty | intermediate |
| Enclosure | Not needed |
| Drying | Not required |
Markforged X7 Specs
| Build Volume | 330 x 270 x 200 mm |
| Max Speed | 200 mm/s |
| Max Nozzle Temp | 300°C |
| Max Bed Temp | N/A |
| Extruder | Direct Drive |
Wood PLA一目でわかる
強み
- Real wood-like appearance and feel
- Can be sanded, stained, and finished like real wood
- Temperature controls color (lower=lighter, higher=darker)
- Does not require hardened nozzle
- Great for decorative and artistic prints
弱点
- Prone to clogging (use 0.6mm nozzle recommended)
- Do not leave filament sitting hot in nozzle (chars)
- Inconsistent color (but adds to wood look)
- Slower print speeds needed
- Not for structural or functional parts
パーソナライズされたAI設定が欲しいですか？
あなたの正確なセットアップと印刷内容を説明してください。3DSearchのAIエキスパートが数秒であなたのMarkforged X7用のWood PLAカスタムスライサー設定を生成します。
3DSearchを試す →ソース: Based on manufacturer specifications and community recommendations, community testing data, manufacturer recommended ranges. フィラメント仕様とプリンターハードウェア制限から計算。