ASA Settings for Prusa Mini+
Recommended slicer settings for printing ASA on the Prusa Mini+ (180 x 180 x 180 mm build volume, 180 mm/s max speed, Bowden extruder).
הגדרות Slicer
העתק את הערכים האלה ל-Slicer שלך (Cura, OrcaSlicer, PrusaSlicer, Bambu Studio)| הגדרה | ערך | טווח |
|---|---|---|
| טמפרטורת חרירון | 260°C | 240-260°C |
| טמפרטורת משטח | 105°C | 90-110°C |
| חרירון בשכבה ראשונה | 265°C | +5°C above normal |
| משטח בשכבה ראשונה | 100°C | At printer max |
| מהירות הדפסה | 40 mm/s | 40-40 mm/s |
| מהירות שכבה ראשונה | 20 mm/s | 25-50% of normal |
| מהירות דפנות | 30 mm/s | 70-80% of normal |
| מהירות תנועה | 60 mm/s | 120-150% of print speed |
| גובה שכבה | 0.2mm | 0.12-0.28mm |
| Infill | 15-20% | 10-30% |
| מספר דפנות | 2-3 | Perimeters/shells |
| שכבות עליונות/תחתונות | 3-4 | Solid layers |
| מאוורר קירור | 0% | From layer 2+ |
| מרחק נסיגה | 4-6 mm | Bowden |
| מהירות נסיגה | 40 mm/s | Bowden |
לפני שמדפיסים
פרופילי איכות הדפסה
Three presets for common use cases with ASA on the Prusa Mini+.
| Profile | Layer Height | Speed | Infill | Best For |
|---|---|---|---|---|
| Draft | 0.28mm | 40 mm/s | 10-15% | Rapid prototyping, test fits |
| Standard | 0.20mm | 40 mm/s | 15-20% | General purpose, everyday prints |
| Quality | 0.12mm | 40 mm/s | 20-30% | Miniatures, display pieces, fine detail |
היצמדות למשטח
ASA uses the same bed adhesion methods as ABS: PEI sheet at high temperature, glue stick, or ASA/ABS slurry. A brim is recommended for larger parts to prevent warping.
מדריך כיוון טמפרטורה
Nozzle: 260°C
Range: 240-260°C. Printer max: 280°C.
- Poor layer adhesion? Increase +5°C
- Stringing or oozing? Decrease -5°C
- Print a temperature tower to find your exact sweet spot
Bed: 105°C
Range: 90-110°C. Printer max: 100°C.
- First layer lifting? Increase +5°C
- Elephant's foot? Decrease -5°C
- Let the bed fully preheat before starting
פתרון תקלות ASA על Prusa Mini+
טיפים מקצועיים ל-ASA
ASA is essentially outdoor-grade ABS -- the go-to for any part exposed to sunlight
While more forgiving than ABS, an enclosure still dramatically improves print quality
Use the same post-processing techniques as ABS; ASA can be acetone-smoothed
For best UV performance, choose lighter colors which resist fading better
Store in a dry box and dry before use if the spool has been open for more than a few days
הגדרות תמיכות
For prints requiring supports with ASA, use tree supports for easier removal and less scarring. Set a 0.15-0.2mm Z-distance between support and model. If you have a dual-extruder setup, consider PVA (for PLA/PETG) or HIPS (for ABS) as dedicated water/solvent-soluble support material.
Prusa Mini+ Specs
| Build Volume | 180 x 180 x 180 mm |
| Max Speed | 180 mm/s |
| Max Nozzle Temp | 280°C |
| Max Bed Temp | 100°C |
| Extruder | Bowden |
ASA Properties
| Nozzle Range | 240-260°C |
| Bed Range | 90-110°C |
| Speed Range | 40-60 mm/s |
| Difficulty | intermediate |
| Drying | 77°C / 4h |
| Enclosure | Recommended |
ASA במבט מהיר
יתרונות
- Best UV resistance of common filaments (10x better than ABS)
- Excellent for outdoor functional parts
- Does not yellow or become brittle in sunlight
- Good impact resistance (similar to ABS)
- Good heat resistance (softens ~100C)
חסרונות
- Requires enclosure (like ABS)
- Emits fumes (similar to ABS)
- More expensive than ABS
- Still prone to warping without enclosure
רוצה הגדרות AI מותאמות אישית?
תאר את ההגדרה המדויקת שלך ואת מה שאתה מדפיס. מומחה ה-AI של 3DSearch מייצר הגדרות סלייסר מותאמות עבור ה-Prusa Mini+ שלך עם ASA תוך שניות.
נסה את 3DSearch →מקורות: Based on Prusa Knowledge Base (help.prusa3d.com), community testing data, manufacturer recommended ranges. הערכים אומתו מתיעוד היצרן ומפרופילי סלייסר רשמיים.