PEEK Settings for UltiMaker S5
Recommended slicer settings for printing PEEK on the UltiMaker S5 (330 x 240 x 300 mm build volume, 300 mm/s max speed, direct drive extruder).
Non compatible
The UltiMaker S5 has a max nozzle temperature of 280°C, which may be below the minimum recommended 370°C for PEEK. Printing may be possible at the lower end of the temperature range but results may be suboptimal.
| Filament Nozzle Requirement | 370-420°C |
| Printer Max Nozzle | 280°C |
| Filament Bed Requirement | 130-160°C |
| Printer Max Bed | 140°C |
Que faire à la place
- Your printer's hotend maxes out at 280°C, but PEEK needs at least 370°C. No amount of tuning can overcome this hardware limitation.
- Try a compatible filament for your UltiMaker S5 — PLA, PETG, and ABS are good options.
- If you need PEEK specifically, you'll need a printer with an all-metal hotend rated for 370°C+ nozzle and 130°C+ heated bed.
PEEK Requirements
PEEK Properties
| Nozzle Range | 370-420°C |
| Bed Range | 130-160°C |
| Speed Range | 15-30 mm/s |
| Difficulty | advanced |
| Enclosure | Required |
| Drying | 150°C / 6h |
UltiMaker S5 Specs
| Build Volume | 330 x 240 x 300 mm |
| Max Speed | 300 mm/s |
| Max Nozzle Temp | 280°C |
| Max Bed Temp | 140°C |
| Extruder | Direct Drive |
PEEK en un coup d'œil
Points forts
- Heat resistance up to 250°C continuous
- Exceptional chemical resistance
- Aerospace and medical grade material
- Biocompatible grades available
Points faibles
- Requires specialized printer (400°C+ hotend, heated enclosure)
- Extremely expensive (~$300-700/kg)
- Needs heated chamber at 120°C+
- Cannot be printed on consumer-grade machines
Tu veux des réglages IA personnalisés ?
Décris ton setup exact et ce que tu imprimes. L'expert IA de 3DSearch génère des réglages de slicer sur mesure pour ton UltiMaker S5 avec PEEK en quelques secondes.
Essayer 3DSearch →Sources : Based on manufacturer specifications and community recommendations, community testing data, manufacturer recommended ranges. Valeurs calculées à partir des spécifications du filament et des limites matérielles de l'imprimante.