PC Settings for Creality Ender 3 V2
Recommended slicer settings for printing PC on the Creality Ender 3 V2 (220 x 220 x 250 mm build volume, 120 mm/s max speed, Bowden extruder).
غير متوافقadvanced
غير متوافق
The Creality Ender 3 V2 has a max nozzle temperature of 255°C, which may be below the minimum recommended 260°C for PC. Printing may be possible at the lower end of the temperature range but results may be suboptimal.
| Filament Nozzle Requirement | 260-310°C |
| Printer Max Nozzle | 255°C |
| Filament Bed Requirement | 100-120°C |
| Printer Max Bed | 110°C |
ما الذي يجب فعله بدلاً من ذلك
- Your printer's hotend maxes out at 255°C, but PC needs at least 260°C. No amount of tuning can overcome this hardware limitation.
- Try a compatible filament for your Creality Ender 3 V2 — PLA, PETG, and PLA+ are good options.
- If you need PC specifically, you'll need a printer with a hotend capable of 260°C+ nozzle and 100°C+ heated bed.
PC Requirements
PC Properties
| Nozzle Range | 260-310°C |
| Bed Range | 100-120°C |
| Speed Range | 20-40 mm/s |
| Difficulty | advanced |
| Enclosure | Required |
| Drying | 80°C / 10h |
Creality Ender 3 V2 Specs
| Build Volume | 220 x 220 x 250 mm |
| Max Speed | 120 mm/s |
| Max Nozzle Temp | 255°C |
| Max Bed Temp | 110°C |
| Extruder | Bowden |
PC في لمحة
نقاط القوة
- Arguably the toughest non-flexible filament
- Excellent heat resistance (softens ~150C)
- Can withstand repeated impacts without shattering
- Can print in translucent/clear
- Ideal for protective equipment and high-temp parts
نقاط الضعف
- Requires all-metal hotend
- Severe warping without heated enclosure
- Very high printing temperatures
- High moisture sensitivity
- Most demanding common filament to print
تريد إعدادات AI مخصصة؟
صِف إعدادك الدقيق وما تطبعه. يُنشئ خبير AI في 3DSearch إعدادات تقطيع مخصصة لطابعتك Creality Ender 3 V2 مع PC خلال ثوانٍ.
جرّب 3DSearch →المصادر: Based on Creality support documentation, community testing data, manufacturer recommended ranges. تم حساب القيم من مواصفات الفيلامنت وحدود عتاد الطابعة.