Tactile Life Counter for Commander / Magic the Gathering / EDH

This is a life counter I made for Commander. An internal rotary detent holds the numbers in place and provides a nice resistance and *click* as you rotate the numbers. #####Models needed: >1x Shaft >1x Cap >1x Divider >2x Ring ####Personal Settings & Suggestions: Printed on Ender3 v2 w/ textured glass bed & Overture PLA >0.02mm Nozzle >0.12mm layer height >210c Printing Temp >60c Build Plate >7mm Retraction >20% Infill #####Nozzle : >0.2mm or 0.4mm nozzle are both fine. 0.2mm makes for smoother numbers and finer threads. #####Rings: >3 options for rings. Soft, Medium, and Hard refer to the resistance in rotation/tactile feedback. Only one ring STL is needed. >Because the rings are printed laying flat the layer height has the greatest impact detail of the digits. 0.12mm layer height looks good and at 0.08 layer height they look phenomenal but the ~5 hour print time per-ring is really rough. #####Cap & Shaft: >Be sure to select matching cap and shaft. either the regular threaded