Taurus TX22 20rd Magazine - slightly longer

Maj_Striker's mag body was a little short where I could only fit 18 rounds. I modified the mag body to be a little longer and bottom tab to be flat instead of angled. I'm using 300mm long x 10mm diameter and .6mm wire diameter spring from aliexpress. The 300mm with .6mm wire diameter is necessary to (barely) push the slide open when the mag is empty - I have 200mm spring but it isn't strong enough. It would probably be better to get a 200-250mm spring with a wire diameter of .8mm instead. If you source a shorter and thicker spring you might also be able to squeeze in another round. Also, the mag body is better to be printed with PLA instead of PETG. With PETG, the mag lips tend to flex a little and allow the round to be angled a little to high so feeding is not as reliable. PLA is stiff enough that the mag lips do not flex when loaded giving it a better feed angle. Known issues: * FIXED: The magazine does not slide smoothly into the mag well and does not drop free. I'm probably not