Sipeed Nano KVM Lite OLED Enclosure

This is the 2nd version of my enclosure for a Nano KVM Lite with an oled screen added. The screen being added is a 0.96" oled display ssd1306 i2c screen. They cost in the range £5 although maybe cheaper if you bulk buy from someone like aliexpress. I have intententionally made the screen space slightly bigger as there seems to be a lot of different screen widths out there. As you can see from my pictures, the white screen has a bit of space each side, the yellow and black one is wider. First thing is all the OLED screens out there are configured for i2x 0x7b that has to be changed to be 0x7a. Which means desoldering a tiny resistor and moving it on the back of the screen. ( Hint a good way to do this is add more solder to remove it from the board as they can be difficult ) I've provided a few images of the wiring for the screen. For my screen i have soldered a wire onto the 3v pin. The enclosure has been slightly redesigned to allow the wire to route from underneath the board eith