Kove Rally 450 indicator repositioning bracket

Kove Rally 450 has really easily removable front fairing. Unfortunately front turn indicator lights are attached to the fairing so the wires need to be disconnected every time you remove the fairing. These brackets allow you to reposition front indicators so that they are attached to the back of headlight assembly and removing-installing fairing is way easier. The brackets reposition the indicators higher. The conversion is fully reversible (no need to cut wires and you can use the existing connections). Only additional hardware needed are 4xM5 bolts and washers. I printed from PETG, with high infill (80-100%). The brackets are designed to be printed without supports (make sure you have the side with a chamfer touching the bed). Make sure to have good bed adhesion as first layer has three parts printed. It should print fine without adhesion, but if in doubt activate adhesion as well.