Paddle Tires - Arrma Typhon Grom 223S - 1/18 Scale

My brother wanted some paddle tires for his Typhon. They make this little beast work pretty nicely on loose dirt and grass. I haven't tested sand or snow yet though. You'll defiantly want to print these out of TPU. The 10 fin might be a little overkill so I included a 6 fin variant. I haven't had the chance to test the 6 yet. #### Edit 1/5/25: I got the chance to test both the 6 fin and 10 fin on snow. They both work great. The only noticeable difference is that the 10 fin had a smoother ride than the 6 fin. Need a 1/10 scale paddle tire? Try my Slicers! https://www.thingiverse.com/thing:6904559 #### Printing + Instal: - The Paddle_Tire .stls should be printed with at least 4 walls and 7% infill. (the less infil you use the more "give" the tires will have). - The settings for inner_hub.stl doesn't matter all that much, at least 3 walls. - The tolerances between the tires and inner hub are 0.00mm. This (in theory) lets you stretch the TPU onto the hub. YOU STILL NEED TO USE GLUE. (v