Wahoo Elemnt Roam Canyon H11 Mount

I wanted an out the front mount for my wahoo elemnt roam for my canyon h11 cockpit. the mount that I got from canyon did not flow well with the aerodynamics of the wahoo mount so I made one. This one is like the canyon mount and the wahoo roam mount had a baby… I made it so it has a twist mount that can be printed separately and then bolted in. so if it breaks it can be replaced easily. The twist mount was modeled after the K-Edge mount. this also has 2 little bumpers printed out of TPU like the factory wahoo mount so it doesn't rattle and fits snug. you will need 2 m3 x 3mm bass heat set inserts and 2 m3 x 4mm screws. To mount it to your cockpit you will need 2 m3 x 30 mm screws. I would recommend printing the mount out of PETG at least, ASA or PA6-CF or any Carbon Fiber Nylon. I printed the main body out of PolyMaker PA6-CF Carbon fiber Nylon with supports with 6 shells. I also printed it with 100% infill just for the strength and since it's PA6-CF it's still pretty