Bolt Action Fidget redesign / remix without Support

**This is a Remix and a complete redesign of the body from scratch by myself.** *Why:* *I noticed "bumps" and unclean Meshes on the Original Parts, the tunnel for the Bolt was much bigger then the Bolt itself. But the main reason was: it needed Supports and angles to print properly.* *So I redesigned all parts new from scratch to be printed without the need of Supports. But for the mechanism I don't take credits, since its the same and not my idea.* **Extras you need** > - 7 6mm x 3mm circular neodymium magnets - 5mm Hex key - (Glue) - (Sandpaper) **How to Print:** *All settings referring to Cura* > - Orient the bottom faces of the Parts exactly like in the picture (yellow Parts) in your slicer, the rotation is up to you preferences. *NOTE: don't print all parts at the same time, for the best result one at a time.* - Resolution 0.2 - Use 100% infill for all the small Parts and ~20% for the Main- and Bolt Part. - Enable Brim with "Brim Only on Outside ☑" and with a