NASA Moon Lamp With Tealights

Moon lamp with 3.6cm (diameter) hole for a tealight. We designed this using NASA CGI Moon Kit: https://svs.gsfc.nasa.gov/cgi-bin/details.cgi?aid=4720 **For this project you will need**: 1. Tealight 2. SuperGlue 3. Soldering kit (If you want to change LED to your specific color) 4. High brightness LEDs that are **foggy** on top. Normal LEDs don't shine as much as it is needed. Also smaller diameter of these lights shine brighter! - try using 3mm diameter ones. They need to be foggy on top so the light is equally scattered and not centered on top. 5. Battery CR 2032 **Important:** - Try to print this without any supports since removing them can be much more difficult and can hurt the entire print. The moon is only a little brittle at the top. As long as it does not fall directly on top part it should stay intact. - The hole is exactly 3.6 cm in diameter for a tealight to be placed inside. Strip the tealight so only LED is visible - no need for flame cover. If the tealight has a chi