Heewing Ranger T1 DJI O3 FPV Mount

All-in-one sled to hold DJI HD O3 camera, air unit, and antenna in a Heewing Ranger T1. Basic Notes: * Utilizes existing rails for mounting points. * Air unit is mounted on standoffs to allow the coax cable to coil underneath, and provide additional airflow. * Air unit mount requires four M1.6 x 10mm bolts to mount through factory case mounts. * Sled mount requires four or six #2 x 3/8" coarse thread screws for wood rails. If using battery tray you'll need ten or twelve total. * Antenna mount is press fit and includes a shoulder to protect wires from being pinched by antenna tube. * Requires removal of original molded camera mount in fuselage nose for camera (see pics), and a small U shaped indentation around top of the antenna mast. * The sled is a two piece design that includes a second spacer block to properly align with mounting rails. * Oval slot at rear of sled acts as an optional strain relief for air unit wiring, but makes installing and removing