Anycubic Kobra 2 X gantry Mounting Plate

Made a mounting plate for the Kobra 2 print head to be used on my Kobra neo gantry. Uses the stock POM wheels and spacers and mounts to the Kobra neo x gantry. Just wire all the electronics to the neos control board however you want. I bought a 3' long 18 pin 2 row ribbon connector harness and some JST connectors to make the wire harness barely long enough so 4 ft may be better. Note: the Kobra 2 connector board has some added circuits for the abl sensor that don't seem to work with the neo control board. Use the old abl sensor and wire directly to the main board. I'm guessing if your bypass the components on the connector board that it will work using the Kobra 2 abl sensor and cable. Will try that and report back. All in all works well, there is some minor flex if you torque the eccentric nut on the pom wheel too much. PLA + seems to work and provides more rigidity than PETG that i have. UPDATE: to get the ABL sensor working on the Kobra 2 printhead PWB: - Remove