Pizza Peel Conveyer Closer

I needed a closer for the cloth ends of my conveyer pizza peel so I came up with this design. It uses magnets to hold the two half's together. The real trick is finding magnets with the correct polarity so they mate countersink side to countersink side. You will need to print two of them. Use 4-40 flat head bolts (1/2") to hold the magnets in place. Magnets are 16X6 mm with countersink. I used eight magnets and it holds surprising strong. The magnets I used were from ; https://www.kjmagnetics.com/proddetail.asp?prod=MMS-A-A Note: I had some other magnets of the same size from Banggood that had reverse polarity that mated to these.