Ender 3 v2 PETG temperature tower gcode (fixed)

For self reference, and for whomever needs it, this is a ready made gcode rendition I made of the original part, with: - 0.4 nozzle, 0.2 layer height - single wall - no supports (obviously) - no infill - half height base (0.5mm instead of 1mm) - 60mm/s speed - no fan (except on bridges) - lower speed on bridges and overhangs EDIT: fixed, first release switched temperature every 5mm instead of 10! Should work now, about to test it EDIT2: after two subsequent edits it should now work! I hope!!!