Bambu Labs P1P - Cable Chain

ATTENTION! Please reference the official Bambu Lab Wiki instructions on disassembling the toolhead cover. (https://wiki.bambulab.com/en/p1/maintenance/toolhead-housing) I designed and tested cable chain adapters for the Bambu Lab P1P so that I can put a lid on the printer. This mod uses standard 10x11mm cable chain. It functions almost identically to the x1 cable chain with the pivoting toolhead adapter. For the best results, pair this mod with either the [Official Bambu Lab PTFE Bracket](https://www.printables.com/model/330471-bambu-lab-ptfe-bracket) or [this one that I used](https://www.printables.com/model/338073-bambu-x1-ptfe-extruder-bracket-ams-error-fix). Also, print two of the cable clips and install them as shown in the pictures. Moving the PTFE bracket as shown in another picture is also required. Post your makes and leave some feedback! :) BOM - 40cm (22 links + 1 end) of [R18 Open Type 10x11mm Cable Chain](https://a.co/d/b2Ffuf6) - (x5) [M3 Heat Set Inserts](https