Sub-thing for Back Panel of Magnetic Everything! Tinker Friendly Ikea Lack Remix

##### ***Last updated Sep. 5th, 2022*** ### Magnetic Everything! Ikea Lack Back Panel I've finally had enough time to start working on the panels. I've decided to continue making sub-things in order to make things a little more organized. Please visit [Magnetic Everything!](https://www.thingiverse.com/thing:5415693) to see the main project. This is just the back panel however, you could do all 4 panels this way. I plan on making the other 3 panels hinged and out of acrylic. ### Parts List 1. 24"x24"1/4" MDF cut to 445mmx550mmx1/4" 1. 1 of each bracket 2. 1 of each bracket alignment tool 3. V1 Panel Plug Qty. - 4 4. V1 Drill Jig - Panel Plug Middle Hole Qty. - 1 *Note: I did not drill the 4 outer holes, only the pilot hole using the middle hole* 5. V1 Drill Jig Upper Bracket Screw Hole 5. 1/8" Drill bit 6. 5/8" spade drill bit *Note: To drill out the center hole for the panel plug* 7. V1 Drill Jig - Panel Plug Bolt Holes Qty. - 1 *Optional, the plugs are a press fit.