Zenitco PT-1 AK Folding Stock Adapter Plate (Airsoft)

Modeled this to fit a 5KU Zenitco PT-1 replica stock to my CYMA AK because the original adapter plate made the stock sit at a slight angle to the receiver which looked dumb. I included a 'flat' adapter plate with no angle correction, a modified 'CYMA' version with angle correction to make the stock straight, and a heavily modified version that will work with Double Bell AKs which otherwise could not be used with this stock at all. To remove the original stock, open dust cover and fold the stock ~half way then gently tap the stock pin upwards from the bottom (towards dust cover) and it should come free with minimal effort. The top of these pins is usually knurled to keep them from falling out, but some use a 'shouldered' pin with the lower end being machined to a slightly smaller diameter instead. Install this part on your PT-1 with the original allen head bolt then with the stock held in the ~half way open position line it up with the receiver and press the pin back into place. Slowly