OZ - Cowardly Lion - 2X

Original Design Wizard of Oz Cowardly Lion Everything prints in the orientation of the models. Might want to use a little bit of supports and even a brim to be safe. Just push tail into hip hole, can use a little glue if desired. There are 2 different Head styles, Shorter or Bigger Beard. Add Supports for the Arm Fur. I printed at .12mm using Cura for slicing Use Paint or Sharpie markers to color eyes, under nose and mouth. Depending on how well your printer prints, the head might be a little loose, If it is, just put a bit of masking tape around the inside of the neck and that should do it.