Shelly plus 1/2.5 box and lid for wiring

This is an enclosure that I designed to hold a Shelly Plus device (1/2.5) and associated wiring in a closed safe box. The design was inspired (but not a remix of) on https://www.thingiverse.com/thing:4974328 The inside height has been set to hold 3-way Wago 221 connectors vertically. NOTE: Shelly Plus 1L *does not fit* the enclosure. The lid has holes for screwing on with M3x0.35 bolts, however I am not totally convinced with the threading on the box (it works even on 0.2mm quality but takes a bit of convincing). Each cable entry has slots and a recess underneath to slip in a 2.5mm cable tie to hold the wire in place. I have variations for 0, 1, 2 or 3 holes at the back, 1 at the front and side slots for fixing against something (let me know and I can share the STL). Tips/donations accepted - https://ko-fi.com/pjvenda