ESP32-WROOM-32D Dupont Case

This is designed to hold an ESP32 with pin headers soldered on and allow you to use dupont connectors with it. As the filenames imply, this was built with the ESP32-WROOM-32D in mind, specifically the one from HiLetGo. The main components consist of a cover, board carrier, and base to house additional electronics. There are two variants of the design, standard and long. The longer variants are identified by a '-L' at the end of the name. * **ESP32-WROOM-32D Base** - Basic shell with enough room to shove some sensors into. No mounting methods are on this...just a box waiting to be filled with your goodies. * **ESP32-WROOM-32D Carrier** - This piece holds the ESP32 itself. There is a notch in the back to hold the board in place. When printed with a .1 layer height, it's a solid fit that firmly holds the board in place. * **ESP32-WROOM-32D Cover** - Simple cover that goes over an ESP32 with vents for the SoC and pin holes for the two buttons * **ESP32-WROOM-32D APD-9960 Lum