Ikea LINNMON Cable Pass-Thru

This is a cable/wire pass-thru designed for Ikea Linnmon work surfaces. These surfaces are essentially hollow-core, filled with a lightweight hexagonal cardboard matrix (much like a closet door), picture shown for reference, there really isn't much to these things. This worktop relies on the top/bottom surfaces being complete to ensure it's structural integrity. I have drilled and mounted several of these pass-thrus gluing each together with Gorilla Glue (the water activated type) which will foam and expand 3-4 times it's size to grip the Ikea surfaces and the interior core cardboard pieces to the print, as well as gluing the print to itself (there are 2 pieces) thus ensuring the integrity of the work-surface as a whole. Make sure you clamp it whilst drying as you need the expanding glue to firmly attach at all points. Drill a 1.75" hole through the Ikea surface, apply expanding glue (Gorilla) and water per the glue instructions to the print and hole, insert print from top and bottom