Potty / Toilet Pet Water Bowl - Auto Filling!

This was the ULTIMATE Gag-Gift for a family member who has a new German Shepherd! From the original Potty Bank (Thankyou 3dPrintingWorld for the original design!): I scaled it up 315% Then used Meshmixer to subtract a 90mm cylinder from where the coin slot is, to accept a standard 1.25lt water/soda bottle. Smoothed using Meshmixer. Also made two bottle adapters - one to have the water level at the lower lip, and one for the water mid-way up the lip. Then made the lid pin. Notes if you want to make this yourself: You will need a 400mm cubed print volume! The main body is just under that and all one piece! No supports needed. I have included the original lid - scale this up by 315% in your favorite slicer program. You will more than likely need a 2kg roll of white (whatever material you choose! Yes, talking to you - argumentative people about different 'food safe' plastics). I used just under 1.5kg for the main print. The bottle adapters are quite hard to get in, but re