Sovol SV01 Enclosure 24" x 24" 1/8 1/4 and 4mm Plastic Case

I remixed the enclosure parts ( https://www.thingiverse.com/thing:3794334 ) so it will work with 1/8 plastic sheets. I was being cheap and did not want to buy the thicker plastic. Plus, it seems to hold up very well for a small to mid-size 3D printer. You need to use the 3D printed middle braces because the thin 1/8 plastic is flexible and will leave gaps in the middle. I used PETG plastic sheets and NOT Lexan or Plexiglass, because PETG will NOT crack. I was kind of rough with my building and my most of my measurements was being eyeballed so the PETG plastic is a bit more forgiving to me. :) If you are curious about the size of the door, all I did was measured 3 inches from each side and grabbed some random round object off my work bench to use as a guide for the corners. Make sure you use something big enough where the jig saw can make the turn in one cut. If you are Purchased Material: (5) 24" x 24" 1/8 thick plastic sheet (96) M4 x 10mm screws (this includes the 8 screw